Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (6)
to General by Kalatti - 4 days, 22 hrs ago - more...
n0expire |
2012-09-12
, 17:44
|
|
Posts: 36 |
Thanked: 0 times |
Joined on Sep 2012
|
#51
|
16gb black 
|
|
2012-09-12
, 17:46
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#52
|
ok the following need to be downloaded:
rootfs: http://nds2.fds-fire.nokia.com/p/d/f...M1-958_ARM.bin
emmc: http://nds2.fds-fire.nokia.com/p/d/f...MMC_NOMAPS.bin
rootfs: http://nds2.fds-fire.nokia.com/p/d/f...M1-958_ARM.bin
emmc: http://nds2.fds-fire.nokia.com/p/d/f...MMC_NOMAPS.bin
|
|
2012-09-12
, 17:50
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#53
|
I'm attaching the full flash file that you will need when you want to flash...
I don't think anything else should go wrong anymore...
I don't think anything else should go wrong anymore...
|
|
2012-09-12
, 17:54
|
|
Posts: 36 |
Thanked: 0 times |
Joined on Sep 2012
|
#54
|
so the previous emmc that i downloaded had to be deleted and i have to download this emmc and this rootfs
|
|
2012-09-12
, 17:57
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#55
|
Originally Posted by n0expire
It comes as a set...the previous emmc link that i had given you was for the rootfs of the same product code...unfortunately u had an older fw of the same product code...if you want we can just download the new firmware of that product code and it should work...however the difference is just the 250+mb that you will have to download in the one I've just give you as there is no maps included...
so the previous emmc that i downloaded had to be deleted and i have to download this emmc and this rootfs
|
|
2012-09-12
, 18:01
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#56
|
the link for the updated rootfs for which mmc you already have: http://nds2.fds-fire.nokia.com/p/d/f...M1-958_ARM.bin
|
|
2012-09-12
, 18:05
|
|
Posts: 36 |
Thanked: 0 times |
Joined on Sep 2012
|
#57
|
i'll download the two new files we will try something fresh
we will try something fresh
|
|
2012-09-12
, 18:21
|
|
Posts: 36 |
Thanked: 0 times |
Joined on Sep 2012
|
#58
|
Please make sure your device is properly powered OFF prior to connecting
the USB cable. You can power your device off by holding down the power
button for 8+ seconds.
Flashing your device will erase all data and reset the device back to
factory state. Please make sure you have backups of your data before
proceeding with flashing.
If flashing does not start disconnect the USB cable from the device, make
sure the device is OFF and then reconnect the device with the USB cable.
For first flashing you may need to repeat this a few times.
Depending on amount of data to be securely erased, the erasing may take as long
as 30
minutes until the flashing starts. Please, be patient.
Check first that device is powered OFF and then connect USB cable.
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
FIASCO ERROR: Invalid FIASCO subimage id (00)
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
FIASCO ERROR: Invalid FIASCO subimage id (00)
Press Enter to exit & Unplug the USB cable from the device to boot new flashed i
mage ...
the USB cable. You can power your device off by holding down the power
button for 8+ seconds.
Flashing your device will erase all data and reset the device back to
factory state. Please make sure you have backups of your data before
proceeding with flashing.
If flashing does not start disconnect the USB cable from the device, make
sure the device is OFF and then reconnect the device with the USB cable.
For first flashing you may need to repeat this a few times.
Depending on amount of data to be securely erased, the erasing may take as long
as 30
minutes until the flashing starts. Please, be patient.
Check first that device is powered OFF and then connect USB cable.
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
FIASCO ERROR: Invalid FIASCO subimage id (00)
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
FIASCO ERROR: Invalid FIASCO subimage id (00)
Press Enter to exit & Unplug the USB cable from the device to boot new flashed i
mage ...
|
|
2012-09-12
, 18:23
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#59
|
are you sure the files downloaded correctly? this looks to me like corrupted images 