Active Topics
-
Porting apps to Leste (29)
to Maemo 7 / Leste by Arno_11 - 5 days, 7 hrs ago -
Install Fonts in N900 (68)
to Maemo 5 / Fremantle by teroyk - 6 days, 10 hrs ago - more...
 |
|
2013-11-04
, 20:29
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#2
|
What does the LED say/blink/light when you push power button?
First thing to do is decouple battery. Did you try already?
Push the power button for more than 8 seconds.
First thing to do is decouple battery. Did you try already?
Push the power button for more than 8 seconds.
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
|
|
2013-11-04
, 22:57
|
|
Posts: 1,746 |
Thanked: 1,832 times |
Joined on Dec 2010
|
#3
|
you need to charge it via the flasher.
|
|
2013-11-05
, 11:32
|
|
Posts: 75 |
Thanked: 12 times |
Joined on Jul 2010
@ Finland
|
#4
|
Originally Posted by peterleinchen
Done that, nothing happens. No led no anything. 8sec hold (tried over 2minutes pressing power button, several times.) No response
What does the LED say/blink/light when you push power button?
First thing to do is decouple battery. Did you try already?
Push the power button for more than 8 seconds.
you need to charge it via the flasher.
__________________
d(^_^)b
d(^_^)b
|
|
2013-11-05
, 12:41
|
|
Posts: 494 |
Thanked: 111 times |
Joined on Aug 2010
@ Finland
|
#5
|
Try opening that phone and take that battery connector out, wait few minutes, then put it back and try to charge.
|
|
2013-11-05
, 16:28
|
|
Posts: 4,118 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#6
|
Originally Posted by SakkeMO
There should not be any response!
Done that, nothing happens. No led no anything. 8sec hold (tried over 2minutes pressing power button, several times.) No response
This will just act as "batt flip out - batt flop in".
-- no need to press that long (8-10s is definitely enough)
Flasher doesn't detect the phone
What kind of USB (mainboard connected, not device front?)?
Which PC, which OS (32/64) and so on?
Correct flasher version?
--what is the behaviour of LED when switching on (power button 3s) after decoupling?
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
Last edited by peterleinchen; 2013-11-05 at 21:42.
|
|
2013-11-09
, 16:42
|
|
Posts: 75 |
Thanked: 12 times |
Joined on Jul 2010
@ Finland
|
#7
|
Originally Posted by peterleinchen
No drivers detect, no nothing. Win7/64bit, flashed with this config many times without problems.
There should not be any response!
This will just act as "batt flip out - batt flop in".
-- no need to press that long (8-10s is definitely enough)
Now after doing so, what does the N9 react like when connecting via USB? What does the PC do (flasher tool, installing drivers)?
What kind of USB (mainboard connected, not device front?)?
Which PC, which OS (32/64) and so on?
Correct flasher version?
--what is the behaviour of LED when switching on (power button 3s) after decoupling?
No leds at any point, no matter what i do.
Ill try to take it apart tomorrow.
__________________
d(^_^)b
d(^_^)b
|
|
2013-11-10
, 13:12
|
|
Posts: 75 |
Thanked: 12 times |
Joined on Jul 2010
@ Finland
|
#8
|
Okay, got it working now.
What i did was take it apart, removed the battery and measured the voltage, 3,89v so the batterty was at full charge.
Then i removed all the cable connectors from the mobo and reinserted them, put all back together and finally inserted the battery connector to mobo, then led flashed
Finally the screen and final screws, booted up like nothing. So removal the battery was probably all needed.
What i noticed after inserting the battery it started generate a lot of heat to the upper section of the phone, but does not anymore. Wonder what caused that?
But it works now so better not to mess with it anymore. And newer leave you n9 to car overnight especially when the winter is coming
What i did was take it apart, removed the battery and measured the voltage, 3,89v so the batterty was at full charge.
Then i removed all the cable connectors from the mobo and reinserted them, put all back together and finally inserted the battery connector to mobo, then led flashed
Finally the screen and final screws, booted up like nothing. So removal the battery was probably all needed.
What i noticed after inserting the battery it started generate a lot of heat to the upper section of the phone, but does not anymore. Wonder what caused that?
But it works now so better not to mess with it anymore. And newer leave you n9 to car overnight especially when the winter is coming
__________________
d(^_^)b
d(^_^)b
| The Following 2 Users Say Thank You to SakkeMO For This Useful Post: | ||
|
|
2013-11-11
, 18:16
|
|
Posts: 34 |
Thanked: 17 times |
Joined on Aug 2011
|
#9
|
this can be sorted with flasher, try several times to flash the phone firmware, at one point it will recognize the device and start charging from 0 to 11%, hit CTRL+C at 10% and then leave the phone plugged for 10 more mins...after that it should turn on and be able to charge..
It does nothing now, wont turn on, no led when connected to charger. Maemo flasher doesn't detect anything either.
I have tried several chargers and usb cables without results. I even left it to charger overnight... Seems like its completely dead.
Next i was thinking to take it a part and charge the battery seperately from the phone, but is there anything else to try before that?
Software is all stock without any tweaks.
What do? Also warranty is expired.
d(^_^)b