Active Topics

 


Reply
Thread Tools
Posts: 118 | Thanked: 15 times | Joined on Jul 2010
#1
my phone hit on the floor this morning and a reboot loop were performing to me about 5 mins.

And i am so glad the phone finally appear something , is a black background with some of square box list as missing image.

so i think the emmc were corrupted.

There is some moment the phone boot up nicely, with welcome nokia and home screen all the things is ok . But i can't run any programs . When i enter file manager , i found that my n900 folder icon were replace by a x.

And i reflash my phone .


Welcome screen as well, with a black background, in the file manager , i can't find my n900 emmc home.

in the memory usage it told me the memory card were corrupted.

Then i decide to flash my emmc as well.

but when i key in the command and execute. The program revert back a message to me as below.

C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RE.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
Using flashing protocol Mk II.
SU_GET_UPDATE_STATUS_REQ terminated with error code 1.

C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RE.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
SU_PREPARE_DATA_BLOCK_REQ terminated with error code 3.
What option i still left to fix my phone?
 
Posts: 3,617 | Thanked: 2,412 times | Joined on Nov 2009 @ Cambridge, UK
#2
As far as I know, none. That definitely looks like a hardware error, so the only fix would be a replacement board. If it's still under warranty/insurance then that would be your best option.

If not, you could probably set things up to run from the SD card instead of eMMC. I've never done this myself, so I've no idea what would need to be done (probably just changing various scripts to mount different partitions), but it certainly should be possible.
 
Posts: 115 | Thanked: 342 times | Joined on Dec 2010
#3
You might want to read this thread. Seems it has been solved there. Good luck.
 
Reply


 
Forum Jump


All times are GMT. The time now is 04:41.