Hi, back from vacation I found a QA failing mail for 0.2 in my mailbox. Please could someone with latest firmware confirm this (see steps below), because I don't own a N9. On my N950 the buttons contains text and I don't know why this problem occurs because I use the buildin TimePickerDialog. You found the latest build in the first post of this thread.
Thanks for your help!
Failed QA
SUMMARY: The buttons from the "Select Stop Time" and "Select Start Time" screens don't contain text.
STEPS TO REPRODUCE:
1. Download the content OTA.
2. Install and launch the content.
3. Select a project.
4. Press the "+" button.
5. Modify the time values.
ACTUAL RESULT: There is no text on the buttons from the "Select Stop Time" and "Select Start Time" screens.
EXPECTED RESULT: The butons should indicate what functionality they have.
AFFECTED DEVICES: N9 Firmware 20.2011.40-4_PR_001
Thanks for your help!
Failed QA
SUMMARY: The buttons from the "Select Stop Time" and "Select Start Time" screens don't contain text.
STEPS TO REPRODUCE:
1. Download the content OTA.
2. Install and launch the content.
3. Select a project.
4. Press the "+" button.
5. Modify the time values.
ACTUAL RESULT: There is no text on the buttons from the "Select Stop Time" and "Select Start Time" screens.
EXPECTED RESULT: The butons should indicate what functionality they have.
AFFECTED DEVICES: N9 Firmware 20.2011.40-4_PR_001
Last edited by EmaNymton; 2012-07-23 at 19:08.