Reply
Thread Tools
Posts: 1,269 | Thanked: 3,961 times | Joined on May 2011 @ Brazil
#281
Sailfish SDK version 1602 (2.0.1) is released, see email from May 10th 2016 :
https://lists.sailfishos.org/piperma...ay/007051.html
Hello again,

Today (May 10th) at 14:00 UTC we have published new installers and repositories of the Sailfish OS SDK. This SDK release is called 1602 and it matches Jolla Release 2.0.1.

The installers for this release of the SDK are available at https://sailfishos.org/wiki/Applicat...st_SDK_Release. If you have an older beta release of the SDK, you should see an update notification in the SailfishOS IDE.

SDK content matches Jolla Release 2.0.1.11 (Taalojärvi). Please see below for detailed information of the changes.

A couple of things you should be aware of:

- As before, in this update the build engine, emulator and targets are reinstalled so you will lose all changes you may have made in those - However, if your application packaging is done correctly, rebuilding your projects should reinstall the packages you have been using.
- Any customization done to SDK (adding new package repositories, adding custom targets, additional source paths) will be removed during the installation process so make your own backup of those before starting the update.
- If you import existing projects made with a previous version of the Sailfish OS SDK, make sure to select the correct kit in the project configuration step. Both ARM and i486 kits are available.
- Package repository contents have been updated and consequently using a previous SDK version with these package repositories is not supported.
- Supported host platforms can be found from: https://sailfishos.org/wiki/Applicat...#Release_Notes.
- For more information, please see the SDK Beta-Qt5 known issues list at: https://sailfishos.org/wiki/Applicat...K_Known_Issues.

SDK IDE (Qt Creator):
- Fixed Enter key handling in hardware device wizard to not cancel the wizard
- Fixed periodic UI freezing when VirtualBox is not running
- Fixed crash: focus SSH key line edit in VM options and hit Escape
- Refreshed API documentation available in the Help mode (Ctrl+7) in Qt Creator to Jolla release 2.0.1.11 level

SDK Build engine:
- Build targets refreshed to Jolla release 2.0.1.11 level
- Harbour RPM validator updated

Emulator:
- Emulator packages refreshed to Jolla release 2.0.1.11 level

If you have any questions, feel free to either send an email to this mailing list: mailto:devel at lists.sailfishos.org, write it up in http://together.jolla.com and tag your issue with 'sdk' or send an e-mail to developer-care at jolla.com.

Happy hacking,
Jolla SDK Team
_______________________________________________
SailfishOS.org Devel mailing list
To unsubscribe, please send a mail to devel-unsubscribe@lists.sailfishos.org
__________________
Python, C/C++, Qt and CAS developer. For Maemo/MeeGo/Sailfish :
Integral, Derivative, Limit - calculating mathematical integrals, derivatives and limits. SymPy - Computer Algebra System.
MatPlotLib - 2D & 3D plots in Python. IPython - Python interactive shell.
-- My blog about mobile & scientific computing ---
Sailfish : Sony Xperia X, Gemini, Jolla, Jolla C, Jolla Tablet, Nexus 4. Nokia N9, N900, N810.
 

The Following 7 Users Say Thank You to rcolistete For This Useful Post:
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#282
I wonder if there's the same showstopper as with previous version...

I could not install it as it required newer glibc than I have in my build machine (Ubuntu 14.04 LTS)
 
marxian's Avatar
Posts: 2,448 | Thanked: 9,523 times | Joined on Aug 2010 @ Wigan, UK
#283
Originally Posted by juiceme View Post
I wonder if there's the same showstopper as with previous version...

I could not install it as it required newer glibc than I have in my build machine (Ubuntu 14.04 LTS)
Rolling distro FTW.
__________________
'Men of high position are allowed, by a special act of grace, to accomodate their reasoning to the answer they need. Logic is only required in those of lesser rank.' - J K Galbraith

My website

GitHub
 

The Following 2 Users Say Thank You to marxian For This Useful Post:
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#284
Originally Posted by marxian View Post
Rolling distro FTW.
Yes. It's something I consider now and then for a brief moment and then reluctantly let go of the idea due to lack of time...

I've got around 2 dozen boxes, running either Debian or Ubuntu and to start learning a new distro & eventually migrate all them to it seems a bit too high a wall
 

The Following User Says Thank You to juiceme For This Useful Post:
Posts: 1,269 | Thanked: 3,961 times | Joined on May 2011 @ Brazil
#285
Sailfish SDK version 1608 (2.0.2) is released, see email from Aug 9th 2016 :
https://lists.sailfishos.org/piperma...st/007342.html
Hello,

Today (Aug 9th) at 8:00 UTC we have published new installers and repositories of the Sailfish OS SDK. This SDK release is called 1608 and it matches Jolla Release 2.0.2.

The installers for this release of the SDK are available at http://sailfishos.org/wiki/Applicati...st_SDK_Release. If you have an older beta release of the SDK, you should see an update notification in the SailfishOS IDE.

SDK content matches Jolla Release 2.0.2.48 (Aurajoki). Please see below for detailed information of the changes.

A couple of things you should be aware of:
- As before, in this update the build engine, emulator and targets are reinstalled so you will lose all changes you may have made in those - However, if your application packaging is done correctly, rebuilding your projects should reinstall the packages you have been using.
- Any customization done to SDK (adding new package repositories, adding custom targets, additional source paths) will be removed during the installation process so make your own backup of those before starting the update.
- If you import existing projects made with a previous version of the Sailfish OS SDK, make sure to select the correct kit in the project configuration step. Both ARM and i486 kits are available.
- Package repository contents have been updated and consequently using a previous SDK version with these package repositories is not supported.
- For more information, please see the SDK Beta-Qt5 known issues list.

SDK IDE (Qt Creator):
- Official Jolla C and Intex Aqua Fish support
- Updated graphical elements
- Fix freezing of SDK control centre
- Fix too small font when viewing Sailfish OS related documentation
- Refreshed API documentation available in the Help mode (Ctrl+7) in Qt Creator to Jolla release 2.0.2.48 level

SDK Build engine:
- Build targets refreshed to Jolla release 2.0.2.48 level
- Harbour RPM validator updated
- Updated graphical elements
- Fixed a connection issue with Virtualbox 5.1
- Fix the all-files-executable symptom with MS Windows as the host OS (see https://harbour.jolla.com/faq#2.9.0)

Emulator:
- Emulator packages refreshed to Jolla release 2.0.2.48 level
- Fixed a connection issue with Virtualbox 5.1

If you have any questions, feel free to either send an email to this mailing list: devel at lists.sailfishos.org, write it up in http://together.jolla.com and tag your issue with 'sdk' or send an e-mail to developer-care at jolla.com.

Happy hacking,
Jolla SDK Team
__________________
Python, C/C++, Qt and CAS developer. For Maemo/MeeGo/Sailfish :
Integral, Derivative, Limit - calculating mathematical integrals, derivatives and limits. SymPy - Computer Algebra System.
MatPlotLib - 2D & 3D plots in Python. IPython - Python interactive shell.
-- My blog about mobile & scientific computing ---
Sailfish : Sony Xperia X, Gemini, Jolla, Jolla C, Jolla Tablet, Nexus 4. Nokia N9, N900, N810.
 

The Following 4 Users Say Thank You to rcolistete For This Useful Post:
Markkyboy's Avatar
Posts: 433 | Thanked: 727 times | Joined on Oct 2012 @ Costa Blanca, España
#286
I would like to get sound from the emulator on Sailfish SDK, instruction on commands are given by martyone on TJC ( https://together.jolla.com/question/...h-os-emulator/ ) but i don't where to do this, can I do it via command prompt, if so, how?
__________________
..oO(Don't just sit there standing around, pick up a shovel and sweep up!)Oo..
 

The Following User Says Thank You to Markkyboy For This Useful Post:
coderus's Avatar
Posts: 6,436 | Thanked: 12,699 times | Joined on Nov 2011 @ Ängelholm, Sweden
#287
you choosed tooo old thread to ask
__________________
Telegram | Openrepos | GitHub | Revolut donations
 

The Following User Says Thank You to coderus For This Useful Post:
Markkyboy's Avatar
Posts: 433 | Thanked: 727 times | Joined on Oct 2012 @ Costa Blanca, España
#288
Didn't think it mattered, surely the method is the same?, I'll start a new thread.
__________________
..oO(Don't just sit there standing around, pick up a shovel and sweep up!)Oo..
 

The Following User Says Thank You to Markkyboy For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:08.