xchris's Avatar
Posts: 20 | Thanked: 11 times | Joined on Aug 2018 @ Bham, UK
#21
oh, and btw guys the issue with the ASUI is fixed for me, that "pattern" was just the redraw of the screen when the ASUI's opening screen scrolls from the bottom to the top, was very slow inteed the first time. On the second time (after installed DT) the scroll was smooth -but I did not like it, so I disabled and have the instant ASUI screen. Indeed a friggin useful util, esp the PIN unlock buttons way bigger.

thx again
 

The Following User Says Thank You to xchris For This Useful Post:
endsormeans's Avatar
Posts: 3,139 | Thanked: 8,156 times | Joined on Feb 2013 @ From my Gabriola Island hermitage, near the Edge of the World
#22
dt not showing...
my error...
rather it should be

Linux noname 2.6.21-omap1 #2 PREEMPT [build date] armv6l unknown

which means dt "is" installed.

good that you got your device upped ..
have fun
__________________
Lurker since 2007, Member since 2013, Certifiable since 1972

Owner of :
1-n770 (in retirement), 3-n800's / 3-n810's (still in daily use), 5-n900's ((3 are flawless, 1 loose usb ( parts), 1 has no telephony (parts))
3-nexus 5's : 1 w/ Floko Pie 9.1 (running beautifully) waiting for Stable Droid 10 rom, 1 w/ ̶Ubuntu Touch, 1 with Maru OS (intend maemo leste when ready)

1/2 - neo900 pre- "purchased" in 2013. N̶o̶w̶ ̶A̶w̶a̶i̶t̶i̶n̶g̶ ̶r̶e̶f̶u̶n̶d̶ ̶p̶r̶o̶c̶e̶s̶s̶ ̶l̶a̶s̶t̶ ̶f̶e̶w̶ ̶y̶e̶a̶r̶s̶ - neo900 start up declared officially dead -
Lost invested funds.


PIMP MY N8X0 (Idiot's Guide and a video walkthrough)http://talk.maemo.org/showthread.php?t=94294
THE LOST GRONMAYER CATALOGShttp://talk.maemo.org/showthread.php...ight=gronmayer
N8X0 VIDEO ENCODING THE EASY WAYhttp://talk.maemo.org/showthread.php...ght=mediacoder
242gb ON N800http://talk.maemo.org/showthread.php?t=90634
THE PAIN-FREE MAEMO DEVELOPMENT LIVE DISTRO-ISO FOR THE NOOB TO THE PROhttp://talk.maemo.org/showthread.php?t=95567
AFFORDABLE MASS PRODUCTION FOR MAEMO PARTShttp://talk.maemo.org/showthread.php?t=93325

Meateo balloons now available @ Dave999's Meateo Emporium
 
xchris's Avatar
Posts: 20 | Thanked: 11 times | Joined on Aug 2018 @ Bham, UK
#23
No worries mate.
 
xchris's Avatar
Posts: 20 | Thanked: 11 times | Joined on Aug 2018 @ Bham, UK
#24
Originally Posted by auouymous View Post
The charging screen is displayed by systemui or ASUI in runlevel 5. Normal desktop mode is runlevel 2. There are symlinks in /etc/rc5.d/ that point to scripts and programs to run when entering and leaving the charging runlevel. You should have links in there to osso-systemui(-early)? or
advanced-systemui(-early)? (if you use ASUI). Now you know!
I am bit out of topic, but as you mention it, is there any way to bypass the ASUI's charging screen and use the Nokia's one?
I changed the symlink /etc/rc5.d/S26advanced-systemui-early to /etc/rc5.d/S26osso-systemui-early (symlink to /etc/init.d/osso-systemui-early of course) but still (after boot + charge cable connected) the N800 goes to ASUI's charge screen.
The reason is that the backlight -while on ASUI charging screen stays on (even a little), so I prefer Nokia's charge screen.
 
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#25
Originally Posted by xchris View Post
is there any way to bypass the ASUI's charging screen and use the Nokia's one?
No, ASUI replaces and pretends to be systemui, having both running together would cause issues. I also can't add a feature to blank the screen or adjust backlight while in charging because the screen flex cable in my n810 broke and I've been too lazy to find another one to fix it. That and one or two of the screws in the screen are damaged and I couldn't get them out.
 
xchris's Avatar
Posts: 20 | Thanked: 11 times | Joined on Aug 2018 @ Bham, UK
#26
Originally Posted by auouymous View Post
No, ASUI replaces and pretends to be systemui, having both running together would cause issues. I also can't add a feature to blank the screen or adjust backlight while in charging because the screen flex cable in my n810 broke and I've been too lazy to find another one to fix it. That and one or two of the screws in the screen are damaged and I couldn't get them out.
oh darn.. I hate stripped screws, did you try the superglue method? Just a bit of superglue on the screw's head then set the screwdriver into the screw head and wait the glue to dry, other option screw extracting pliers, depends the type of the screw.
Alternative, if you can spot the damage on the flexcable: conductive paint (bit hit-or-miss solution)
 
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#27
Originally Posted by xchris View Post
Just a bit of superglue on the screw's head then set the screwdriver into the screw head and wait the glue to dry, other option screw extracting pliers, depends the type of the screw. Alternative, if you can spot the damage on the flexcable: conductive paint
Finding damage on the cable would have been too easy. There is no way pliers could remove the screws, but I might have to try superglue.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 15:15.