Thanks Joerg_rw

I'm eager to see the new concept, and especially - for ability to use external power sources for the my power hungry N900 + add ons

You are right, will use udev, for my case :P), as you suggestion

Best regards

Hi,

when I insert a USB/UART converter, it is recognized (dmesg) but ttyUSB0 is not created.

Any Idea?

If your device do not use generic usb to serial driver , it will probably do not work, it's not h-e-n fault!
You do not have needed module for your device
For me ONLY FTDI chip is working.

For reference see attached file , commented # drivers are not included in present kernel-power 46.

For future problems with that post here, there is special place for that!
If you post there your dmesg log I can try to help.

Regards

Is there a possibility to download the patched sources that were used for this power-kernel? In that case I can build the module myself.

t900:~# apt-cache policy kernel-power-source
kernel-power-source:
Installed: (none)
Candidate: 2.6.28-maemo46
Version table:
2.6.28-maemo46 0
500 http://repository.maemo.org fremantle/free Packages
2.6.28-maemo40 0
500 http://repository.maemo.org fremantle/free Packages

t900:~# apt-cache search '.*kernel-power.*'
kernel-power-settings - Tools for the customization of kernel settings
multiboot-kernel-power - Maemo 'kernel-power' configuration for multiboot
uboot-power - Installs u-boot to the kernel area, along with kernel-power-46. RISKY INSTALL. U-Boot boot loader for Maemo 5 PR1.3 w/ kernel-power v46. DO NOT USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING. RISK OF REBOOT LOOPS! MAY EAT YOUR BRAIN. To remove this again, apt-get install --reinstall kernel-power kernel-power-flasher and reboot.
linux-kernel-power-headers - Linux Kernel Headers for development
kernel-power-bootimg - Linux kernel boot image
kernel-power-headers - Linux kernel headers <<<*****
kernel-power - Flashable Linux kernel
kernel-power-flasher - Linux kernel updater for an enhanced Maemo 5 kernel 2.6.28.10
kernel-power-modules - Linux kernel modules
hostmode-gui - h-e-n, hostmode easy now
kernel-flasher-maemo - Please REMOVE this package.
kernel-power-source - Linux kernel-power sources for rx-51 product <<<*****

/j

For kernel-power's source use apt-get source kernel-power, kernel-power-source is just a modified package so other packages can depend on it when they're built.

looks like i have to install the sdk on my pc first, i'm not going to compile this on the mobile phone :-))

Thanks

Though I gave proof of my lack of detailed knowledge about kernel building above, I dare to suspect you don't need to build a whole kernel just to get an additional module compiled. Probably even the kernel-headers should suffice for this task

/j

No, it's not your fault actually.
kernel-power's source should build the kernel-power-source package, but doesn't (titan scrapped it for some reason), and that prevented me from sending apps that need compiled modules, so I had to fork the kernel-power-source package separately and update it with each update of kp.

So, yeah, it's not your fault

Hello everyone!

when i first tried h-e-n i worked pretty good, but now since i reflashed my device it only works with a USB Mouse..USB HDDs make a weird sound and it seems like there isn't enought power to start them up..

I really need your help!