Poll: Do you want to buy one, and why? (Votes are public)
Poll Options
Do you want to buy one, and why? (Votes are public)

Reply
Thread Tools
Posts: 123 | Thanked: 268 times | Joined on Dec 2009 @ Helsinki, Finland
#351
Update to 0.30 went smoothly. I have now Uitukka on this Jolla, Toholed seems to be still working).
 
kimmoli's Avatar
Posts: 562 | Thanked: 2,744 times | Joined on Dec 2013 @ Espoo, Finland
#352
Updated the drawing interface;

http://talk.maemo.org/showpost.php?p...&postcount=341

The picture upload method now supports PNG (and other formats), so adding toholed support to yout own app is now "easy".
__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH
 
tiempjuuh's Avatar
Posts: 202 | Thanked: 165 times | Joined on Jul 2012 @ Apeldoorn, Netherlands
#353
My OH is getting somewhat dirty, so could you maybe upload the stl files so I can order a new OH backplate from shapeways? Is it easy to remove the electronics from the backplate?
__________________
Nokia N900 hw rev. 2204
Nokia N9 16GB black hw rev. 1507
Jolla + LETOH
 
kimmoli's Avatar
Posts: 562 | Thanked: 2,744 times | Joined on Dec 2013 @ Espoo, Finland
#354
You can order "No engravings" version in any color now from shapeways; http://shpws.me/xEsZ

(For some unknown reason shapeways did enable only black and polished white for other versions with text and/or derp - so i didn't put them for sale at all)
__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH
 
tiempjuuh's Avatar
Posts: 202 | Thanked: 165 times | Joined on Jul 2012 @ Apeldoorn, Netherlands
#355
I'd actually prefer the version with engravings...

So how did you manage to print it in yellow if shapeways doesn't accept it?
__________________
Nokia N900 hw rev. 2204
Nokia N9 16GB black hw rev. 1507
Jolla + LETOH
 
kimmoli's Avatar
Posts: 562 | Thanked: 2,744 times | Joined on Dec 2013 @ Espoo, Finland
#356
They accept it for print by me, but not for sale in that shop.
I'll check is there anything i can do.

btw, changing the electronics to another printed part is "easy". But propably you need to have new thin doublesided tape.
I use 3M 468MP

Adhesive tape is on three places, on left and right edges of pcb,
and on the OLED display flex-cable end. 3 pieces of about ~3x10mm
Lower end of OLED is attached by few pegs.
There is additionally black thicker tape piece between ALS and IR led.

1. Pop the OLED up from the pegs, bend 3d print a little and press display in.
2. Pull OLED display slowly up - now you see where double-sided tape is, you can bend it "alot" against the flex cable (avoid 90 degrees)
2b. Double sided tape seems to give up when slowly applying force to it.
2c. That doiuble sided tape and piece of black tape (which is on OLED glass) may be left of printed part. No worries.
3. Now start lifting the PCB slowly, avoid bending the PCB too much, find alternative positions to lift it if it does bend too much.

Check that the black piece is between ALS and IR sensor

Replace the other double-sided tape pieces.

1. Place the PCB + OLED in the new print, PCB against top edge and OLED below pegs.
2. Do not press with force, just so far that you can check that IR led is aligned in middle of the larger hole. Adjust pcb position (propably against another edge)
3. Apply pressure to the double-sided tapes for few secs.
__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH
 

The Following 3 Users Say Thank You to kimmoli For This Useful Post:
kimmoli's Avatar
Posts: 562 | Thanked: 2,744 times | Joined on Dec 2013 @ Espoo, Finland
#357
Had to re-upload the model...
https://www.shapeways.com/shops/kimmoli
__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH
 
kimmoli's Avatar
Posts: 562 | Thanked: 2,744 times | Joined on Dec 2013 @ Espoo, Finland
#358
Ok,
Time to make 50 more TOHOLEDs.

I will go through TMO private message and twitter, and send personal invitation link.

Due my limited time, this will be as is. Unfortunately no additional features.
__________________
TOH ideas, concepts and creations since 2013 toholed tohuart toheink Heebo tohIRi i2ctool tohmm LeTOH FMTOH
 

The Following 4 Users Say Thank You to kimmoli For This Useful Post:
Posts: 958 | Thanked: 483 times | Joined on May 2010
#359
awesome news!!
 
Posts: 73 | Thanked: 35 times | Joined on Jun 2013
#360
what was the price for toholed? - tnx
 

The Following 2 Users Say Thank You to Quaddy For This Useful Post:
Reply

Tags
jolla toh, toholed

Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:55.