Reply
Thread Tools
MaemoUser is offline MaemoUser
2014-01-17 , 15:56
Posts: 189 | Thanked: 143 times | Joined on Nov 2009
#1
Hi everybody,

I have a problem with connecting to a network which uses IPv6 Dhcp. The address in the connman config gets assigned correctly, but it does not come up on the interface:
Code:
IPv6.method=auto
IPv6.privacy=disabled
IPv6.DHCP.DUID=uidisset
IPv6.DHCP.LastAddress=ip:1::fffd
but on interface:
Code:
11: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 100
    link/ether <mac> brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.11/24 brd 192.168.0.255 scope global wlan0
    inet6 link-local4/64 scope link 
       valid_lft forever preferred_lft forever
Route is also pushed correctly and installed:
Code:
default via fe80::5054 dev wlan0  proto kernel  metric 1024  expires 1373sec
I also see dhcpv6 requests with tcpdump but the ip address does not come up on the interface.

Does anybody know what leads to this behaviour?
 

The Following User Says Thank You to MaemoUser For This Useful Post:
MaemoUser is offline MaemoUser
2014-01-18 , 15:18
Posts: 189 | Thanked: 143 times | Joined on Nov 2009
#2
I have found out that everytime I delete the entire network from the connman directory and readd it via GUI. DHCPv6 is working but if I connect the next time it's not working anymore.
 

The Following 2 Users Say Thank You to MaemoUser For This Useful Post:
Reply

Tags
ipv6 dhcp jolla

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 17:18.

Contact Us - Home - Archive - Top