Reply
Thread Tools
explit's Avatar
Posts: 592 | Thanked: 1,603 times | Joined on Apr 2010 @ Berlin / Germany
#801
Originally Posted by pali View Post
Compile u-boot yourself. If you are unable, then this option is not for you.

From above output I see that you have enabled cssu-devel (which may eat your brain!). So if you are not understand what are you doing, then do not do it!!!
ok Pali, understood...
 
explit's Avatar
Posts: 592 | Thanked: 1,603 times | Joined on Apr 2010 @ Berlin / Germany
#802
Originally Posted by pali View Post
Compile u-boot yourself. If you are unable, then this option is not for you.

From above output I see that you have enabled cssu-devel (which may eat your brain!). So if you are not understand what are you doing, then do not do it!!!
Thanks Pali, i compiled the latest
u-boot 2013.04-2 with attached kernel-2.6.28.10-cssu3

All steps were described at the top of this post, the only problem was to find
the package: sdk-fiasco-gen
As soon as i had this package installed - it was not so complicated.
I noticed your advice and disabled cssu-devel in my Repos.

Now i have this items in U-Boot-Menu:

Kernel-2.6.28.10-power53 (default boot entry)
U-Boot with attached Kernel-2.6.28.10-cssu3 (Internal NAND)
Kernel-2.6.28.10-cssu3
U-Boot 2013.04-2

Ok i can't go back to the stock PR1.3 kernel-2.6.28-omap1 but i think, i can leave without it.

Thank you for your help !
 

The Following User Says Thank You to explit For This Useful Post:
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#803
Originally Posted by explit View Post
the only problem was to find the package: sdk-fiasco-gen
just install it in scratchbox via apt: apt-get install sdk-fiasco-gen
anyway, direct link is here: http://repository.maemo.org/pool/mae...dk-fiasco-gen/
 

The Following User Says Thank You to pali For This Useful Post:
explit's Avatar
Posts: 592 | Thanked: 1,603 times | Joined on Apr 2010 @ Berlin / Germany
#804
Originally Posted by pali View Post
just install it in scratchbox via apt: apt-get install sdk-fiasco-gen
anyway, direct link is here: http://repository.maemo.org/pool/mae...dk-fiasco-gen/
Maybe you have the SDK-Repo enabled, which i haven't.
With apt-get install sdk-fiasco-gen i got nothing...
Anyway, thanks, anything is now as it should be....
 
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#805
Originally Posted by explit View Post
Maybe you have the SDK-Repo enabled, which i haven't.
SDK repo is enabled by default in scratchbox, without it no compilation is possible...
 

The Following User Says Thank You to pali For This Useful Post:
Posts: 1,808 | Thanked: 4,272 times | Joined on Feb 2011 @ Germany
#806
Originally Posted by explit View Post
Thanks Pali, i compiled the latest
u-boot 2013.04-2 with attached kernel-2.6.28.10-cssu3
Nice!
Care to upload it somewhere for people too lazy to do what you did?

Thanks.
 

The Following User Says Thank You to reinob For This Useful Post:
Posts: 3 | Thanked: 0 times | Joined on Apr 2014 @ shiraz
#807
hi pali
thanks a lot for creating this u-boot
but i have a series problem.i have multiboot before,when i install u-boot and reboot my phone with open keyboard, type run attachboot and it writes starting kernel ok but the phone shut down compeletly after 4-5 second and when use omap2,never see u-boot in starting menu
 
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#808
That is problem of multiboot, because on every start it reflash kernel image in nand. You cannot use multiboot in this way...
 
Posts: 3 | Thanked: 0 times | Joined on Apr 2014 @ shiraz
#809
yes u'r right.i try installing u-boot by fapman.does it delete multiboot completely,if not what should i do?
thanks for answering these questions
 
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#810
You cannot use multiboot with uboot. But I have no idea if uninstalling multiboot is possible... Reflashing device should help.
 
Reply

Tags
bootmenu, u-boot

Thread Tools

 
Forum Jump


All times are GMT. The time now is 16:20.