Reply
Thread Tools
thepenguinonthetelly's Avatar
Posts: 31 | Thanked: 3 times | Joined on Jan 2008 @ Indianapolis, IN
#31
Originally Posted by bunanson View Post
Try http://panasonic.jp/support/global/c...formatter.html ; see here, http://www.internettablettalk.com/fo...ight=panasonic

A. In most instances this step is unnecessary; so, at least if you don't have a card reader or Windows, skip it and see if the process turns out OK anyway.
B. Download and install the Panasonic SD Memory Card Formatting Software into your Windows computer.
C. Place your SD Card in a card reader.
D. Use the Panasonic formatter to format the card. Select the options for FULL Erase ON and for Format Size Adjustment OFF. (It doesn't matter if the formatter reports that it can't use the Erase function.) This low-level formatting takes about 10 minutes.

We will get it done! Just being systematic

bun
Actually, I remembered that program from when I had to use it earlier in the year from when I upgraded to Diablo. I had used it a few times to format, but for some reason it wasn't doing it right or I had the wrong things marked -- in any case, it worked on my final try this morning, and everything is in working order again, but yeah, I had to use the 770 instructions because of the error about the partition name, I think, hehehe. Thanks for the help or I'd never gotten my card in working order again.
 

The Following User Says Thank You to thepenguinonthetelly For This Useful Post:
Posts: 4,030 | Thanked: 1,633 times | Joined on Jul 2007 @ nd usa
#32
With a SD adapter, I cloned the fine-tuned N800 onto a miniSD and pumped it into my N810. Now my N810 has the same User interface and settings as my N800. Again, the cloning needs to do is, partitions and then ./nupgrade.sh wipe. and that is all.

bun
 
Posts: 271 | Thanked: 107 times | Joined on May 2008 @ Georgia
#33
Hello All.

Am stuck please help.....
I pasted my last successful step.
????? Should 0p2, 0p3 and 0p4 be partition also?????? Thanks

+++++++++++++++++++++++++++++++++++
Nokia-N810-43-7:~# sfdisk /dev/mmcblk0 -uM
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk0: 61440 cylinders, 4 heads, 16 sectors/track
Old situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk0p1 0+ 1919 1920- 1966072 b W95 FAT32
/dev/mmcblk0p2 0 - 0 0 0 Empty
/dev/mmcblk0p3 0 - 0 0 0 Empty
/dev/mmcblk0p4 0 - 0 0 0 Empty
Input in the following format; absent fields get a default value.
<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>
Usually you only need to specify <start> and <size> (and perhaps <type>).

/dev/mmcblk0p1 :

++++++++++++++++++++++++++++++++++++
This is what I get when I run the mkdosfs command, but my umount command seem to run fine above. Please Help..Thanks.
>>

Nokia-N810-43-7:~# mkdosfs /dev/mmcblk0p1
mkdosfs 2.11 (12 Mar 2005)
mkdosfs: /dev/mmcblk0p1 contains a mounted file system.

---------

Last edited by crasbelize; 2009-01-18 at 13:16.
 

The Following User Says Thank You to crasbelize For This Useful Post:
Posts: 271 | Thanked: 107 times | Joined on May 2008 @ Georgia
#34
figured it out.
but for some reason my copy copied to my flash drive.
 

The Following User Says Thank You to crasbelize For This Useful Post:
Posts: 271 | Thanked: 107 times | Joined on May 2008 @ Georgia
#35
Originally Posted by bunanson View Post
Worked on 1st shot

Absolute requirement for this instructions: you got to know how to flash your tablet if you scr@w up. YMMV, here we go:

1) http://www.internettablettalk.com/fo...e+simplified87, thread #292 and #347 just for your reading pleasure

2) install rootsh to gainroot, ApManager>Browse Installable Apps>All>rootsh

3) install wget
sudo gainroot
apt-get install wget

4) install e2fsprogs package, app manager>Tools>app atalog...>new

Web address: http://repository.maemo.org/
Distribution: bora
Components: free non-free
OK>close>exit app manager. You HAVE to exit app manager to proceed.

sudo gainroot
apt-get install e2fsprogs
exit

5) partition >500MB on 2G internal SD (the one has to open the back plate of your N800 for access, NOT the kickstand SD card). If you have a lot a lot of progs installed, you may need to make this partition even bigger than 500MB.

If error message, continue to proceed, sometimes the umount is NOT necessary, and uncheck the swap memory, Controlpanel>Memory>Virtual uncheck.
sudo gainroot
umount /dev/mmcblk0p1 (numeral zero and numeral one)
sfdisk /dev/mmcblk0 -uM
/dev/mmcblk0p1: 0,1400,0C (substitute C with 6 for fat16 partition)
/dev/mmcblk0p2: ,,,
/dev/mmcblk0p3:
/dev/mmcblk0p4:
reboot

sudo gainroot
mkdosfs /dev/mmcblk0p1

6) install boot menu, http://www.internettablettalk.com/fo...ad.php?t=22771

7) This is for a 2G card internal SD with the above partitions, see this for various different partitions, http://www.internettablettalk.com/fo...ified87&page=5, thread #49; follow http://www.internettablettalk.com/fo...e+simplified87, thread #292, or

-----------------------------------------------------------
As user "user"
mkdir ~/bin
cd ~/bin
wget http://www.nmacleod.com/nokia/bin/nupgrade.sh
wget http://www.nmacleod.com/nokia/bin/tar
chmod +x nupgrade.sh tar

sudo gainroot
cd ~/bin
./nupgrade.sh wipe
"Using...ext2fs
Continue? (YES/no) : " YES
it runs for 5+ minutes and ends up with
...
Committing updates and Unmounting filesystems
Done
/home/user/bin #

No error messages.

Done.

check with diskusage that you have >256MB on rootfs; see pic; done with partition /dev/mmcblk0p1: 0,1200,06
Now on top of my 33 installed programs, I still have 416.8 MB space to install MORE programs. How about yours ?

For your reading pleasure,
http://www.internettablettalk.com/fo...e+simplified87 original Milhouse clone, threads #292,#347 and #49 for partition info on various size cards
http://www.internettablettalk.com/fo...ight=partition complete clone instructions
http://www.internettablettalk.com/fo...ad.php?t=25673 upgrade to 5.2008.43-7
http://www.internettablettalk.com/fo...ad.php?t=22771 bootmenu

And all PB's stuff, in particular, http://www.internettablettalk.com/fo...ad.php?t=25714

Enjoy,


bun
________________________
N810/5.2008.43-7 w SD boot




ok...success.
but i don't think the clone was copied to my int. mem.

here is what my last step look like:

=======================================

Nokia-N810-43-7:~/bin# ./nupgrade.sh wipe

Target device: Internal Flash card, second partition (/dev/mmcblk0p2)
Using filesystem: ext2fs
Continue? (YES/no) :
========================================

shouldn't the target device be int. SD card or something?
and when I installed a app, my device memory drops.
 

The Following User Says Thank You to crasbelize For This Useful Post:
Posts: 4,030 | Thanked: 1,633 times | Joined on Jul 2007 @ nd usa
#36
where is the clone copied to? Booting successful?

bun
 
Posts: 271 | Thanked: 107 times | Joined on May 2008 @ Georgia
#37
its booting ok from the int mem.
but when I install apps my flash memory decrease.

I would like my apps to be installed on the int memory.
 
Posts: 4,030 | Thanked: 1,633 times | Joined on Jul 2007 @ nd usa
#38
Originally Posted by crasbelize View Post
its booting ok from the int mem.
but when I install apps my flash memory decrease.

I would like my apps to be installed on the int memory.
Are you booting from the int flash or int memory? You could NOT boot up from int memory and install apps on int flash, NOT easily done. They do NOT communicate.

bun
 

The Following User Says Thank You to bunanson For This Useful Post:
Posts: 271 | Thanked: 107 times | Joined on May 2008 @ Georgia
#39
that's what happenning.
when i first tried it.....i made a mistake and cloned my OS to my int flash and in the middle of it ran out-off-space.

when tried the second time the right way this is what I got.

booting from immc2 but my apps are being installed on my int flash.
if i uninstall a app my int flash memory in control panel change.
is there a command to check this?
 
Posts: 4,030 | Thanked: 1,633 times | Joined on Jul 2007 @ nd usa
#40
Use Diskusage to look at rootfs, it should be the size of your partition, if you boot up SD successfully.

xterm
cat /proc/partitions , i booted from ext SD and my size is 604 MB

bun
 

The Following User Says Thank You to bunanson For This Useful Post:
Reply

Tags
2008os, bootmenu, clone, upgrade


 
Forum Jump


All times are GMT. The time now is 08:54.