Reply
Thread Tools
Posts: 468 | Thanked: 610 times | Joined on Jun 2006
#31
I would like to use this USB/IP idea to connect a DVB-T adapter to the N900.

But I also found a PCTV DVBT Wlan solution:
http://www.pctvsystems.com/Products/...B/Default.aspx

How do you think will this device transfer the streams? couls be a simple video stream over RTSP, or they could use something like a USB over IP solution.

I need the latter because ultimately I want to view pay-tv channels, so I need "direct" access to the DVB-T adapter in order to de-scramble the streams.
 

The Following User Says Thank You to Bernard For This Useful Post:
MohammadAG's Avatar
Posts: 2,473 | Thanked: 12,265 times | Joined on Oct 2009 @ Jerusalem, PS/IL
#32
Same problem as Bernard
Code:
request failed at peer, 1
usbip err: vhci_attach.c: 324 (query_import_device) recv op_common
usbip err: vhci_attach.c: 362 (attach_device) query

Last edited by MohammadAG; 2010-02-26 at 11:30.
 

The Following User Says Thank You to MohammadAG For This Useful Post:
Posts: 9 | Thanked: 4 times | Joined on Jul 2007
#33
Originally Posted by MohammadAG View Post
Same problem as Bernard
Code:
request failed at peer, 1
usbip err: vhci_attach.c: 324 (query_import_device) recv op_common
usbip err: vhci_attach.c: 362 (attach_device) query
I also noticed the same problem and tried to debug the software. So instead of
usbipd -D
I started the daemon with
usbipd -d
to get debug information. And then usbip seems to work fine
Now I have virtually connected USB mouse on my PC. And also worked between two Ubuntu PCs. Haven't tried yet with N900.
 

The Following User Says Thank You to stomper For This Useful Post:
Posts: 468 | Thanked: 610 times | Joined on Jun 2006
#34
I believe that -d or -D does not matter.
if the error occurs, you should kill the usbip deamon en restart it with the sudo usbipd -D command. after that it also works for me.
I also tested it on the n900, but that does not yet work. I do get a port 0 attached message, and there is a second USB device when I run lsusb, but when I look in output of dmesg, I see a lot of errors. (bad cable etc. etc.)

Maybe it was because I tried to send a USB stick to the N900, and maybe it lacks the proper drivers. I will try a keyboard and/or mouse tomorrow.
 

The Following User Says Thank You to Bernard For This Useful Post:
Posts: 362 | Thanked: 426 times | Joined on Nov 2010 @ Italy, Lombardia
#35
I have tried to use N900 as WiFi USB Server for a Windows Client but it not works.
  • On N900 (Power Kernel v48) I have done:
    • Used h-e-n to power and enumerate an Usb Stick (full usb 2.0)
    • Connected N900 to Access Point
    • Loaded the needed usbip modules and started the usbip deamon:
      sudo gainroot
      modprobe usbip
      modprobe usbip_common_mod
      usbipd -D
    • Shared the Usb Stick:
      usbip_bind_driver --usbip 1-1
  • On Windows (Seven x64 with UsbIp driver installed) I have done:
    • Listed remote usb device:
      C:\Users\xxxx\usbip_windows_v0.2.0.0_signed>usbip -l 192.168.x.3
      This works correctly and reports:
      - 192.168.x.3
      1-1: SanDisk Corp. : Cruzer Micro 256/512MB Flash Drive (0781:5151)
      : /sys/devices/platform/musb_hdrc/usb1/1-1
      : (Defined at Interface level) (00/00/00)
      : 0 - Mass Storage / SCSI / Bulk (Zip) (08/06/50)
    • Attached the remote usb device:
      C:\Users\xxxx\usbip_windows_v0.2.0.0_signed>usbip -a 192.168.x.3 1-1
      This not works, it hangs for some seconds and then it returns an error:
      new usb device attached to usbvbus port 1
      usbip err: usbip_windows.c: 374 (write_to_dev) read from sock ret 0 not equal a usbip_header

After the error something crashes on N900 because there isn't anymore shared usb device and the command lsusb hangs if executed.
I must reboot N900 to fix it

I have tried 2 o 3 times with different Usb devices, with always same results (and crashes)

Last edited by Fabry; 2011-09-06 at 22:22.
 

The Following User Says Thank You to Fabry For This Useful Post:
Posts: 1 | Thanked: 1 time | Joined on Sep 2012
#36
Just came across your thread googling about usb over network solution.. Guys, have anybody tried http://www.net-usb.com/ in action?
 

The Following User Says Thank You to Flop For This Useful Post:
Posts: 2 | Thanked: 2 times | Joined on Feb 2017
#37
I use the alternative solution to access USB over IP network - www.eltima.com/usb-over-ip/
The solution helped me a lot, but I bought it with the promocode and there was 30% off.
 

The Following User Says Thank You to Stanku For This Useful Post:
Posts: 2 | Thanked: 2 times | Joined on Feb 2017
#38
Originally Posted by Flop View Post
Just came across your thread googling about usb over network solution.. Guys, have anybody tried net-usb.com in action?
Yes, I did use it. It is Eltima Solution. It helped me a lot to access my USB devices over network.
 

The Following User Says Thank You to Stanku For This Useful Post:
Reply

Tags
nokia n8x0, nokia n900

Thread Tools

 
Forum Jump


All times are GMT. The time now is 14:22.