Active Topics
-
Porting apps to Leste (29)
to Maemo 7 / Leste by Arno_11 - 3 days, 11 hrs ago -
Install Fonts in N900 (68)
to Maemo 5 / Fremantle by teroyk - 4 days, 14 hrs ago - more...
|
2008-06-28
, 23:50
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Oct 2007
|
#22
|
Originally Posted by XL1200c
I tried your solution and it worked. The camera is now flipping and the internet call app is starting when the camera pops out. Thanks!!
I had the problem before I installed the camera app.
But I do believe I have it fixed. I removed the camera app, shutdown the tablet and removed the battery for 10 minutes. The camera appears to working correctly, I'll check it again tomorrow.
__________________
http://HDTV.real-incentives.com/13603
http://HDTV.real-incentives.com/13603
 |
|
2008-06-29
, 04:33
|
|
Posts: 49 |
Thanked: 13 times |
Joined on Dec 2007
@ Texas
|
#23
|
My dad's N800 did work using XL1200c way.
But I did it a different way because it didn't work for me.
(Make sure camera app is uninstalled)
Shutdown N800
Take out battery for 10 mins
Replace battery
****Pull out the Camera****
Start N800
Start New Internet Call
(it should work)
I reboot with the camera back in and it was working fine.
I installed Camera app and it worked too.
Enjoy!
But I did it a different way because it didn't work for me.
(Make sure camera app is uninstalled)
Shutdown N800
Take out battery for 10 mins
Replace battery
****Pull out the Camera****
Start N800
Start New Internet Call
(it should work)
I reboot with the camera back in and it was working fine.
I installed Camera app and it worked too.
Enjoy!
__________________
rubiks == skibur = skybur != skeebur
"Life is too short to waste on sleep" - Johnny Cunningham
http://www.skibur.com
rubiks == skibur = skybur != skeebur
"Life is too short to waste on sleep" - Johnny Cunningham
http://www.skibur.com
|
|
2008-06-29
, 09:09
|
|
Posts: 2,802 |
Thanked: 4,491 times |
Joined on Nov 2007
|
#24
|
Camera app installed, Internet call autostarts when camera pops out, image flips fine.
 |
|
2008-06-29
, 09:52
|
|
Posts: 166 |
Thanked: 26 times |
Joined on Jun 2007
@ Hampshire, UK
|
#25
|
As I reported before, it was not working. I have done nothing but now find its both autostarting and flips.....????
|
|
2008-06-29
, 11:18
|
|
Posts: 209 |
Thanked: 31 times |
Joined on Oct 2006
|
#26
|
Originally Posted by skibur
I don't think that you need to remove the battery for 10 minutes. What effect should that have?
My dad's N800 did work using XL1200c way.
But I did it a different way because it didn't work for me.
(Make sure camera app is uninstalled)
Shutdown N800
Take out battery for 10 mins
Replace battery
****Pull out the Camera****
Start N800
Start New Internet Call
(it should work)
I reboot with the camera back in and it was working fine.
I installed Camera app and it worked too.
Enjoy!
I had the same problem and followed your steps... but I didn't remove the battery! Just shutdown... pullout camera and boot again.
|
|
2008-06-29
, 12:53
|
|
Posts: 32 |
Thanked: 6 times |
Joined on Aug 2007
@ Liberty, SC
|
#27
|
I tried the posted instructions without removing the battery and it did not work. Then I retried and removed the battery for abount 30 seconds - still no joy. So I followed every step as outlined - sucess!! Reinstalled the camera app and still working - so far (time will tell if it sticks)
the reason removing the battery would make a diffrence is that almost all electronics now days does not realy turn off when you power down. the only way to remove low level hardware settings is to compleatly power off the hardware i.e. remove the battery for a time.
Last edited by fpbrooks; 2008-06-29 at 12:58.
the reason removing the battery would make a diffrence is that almost all electronics now days does not realy turn off when you power down. the only way to remove low level hardware settings is to compleatly power off the hardware i.e. remove the battery for a time.
Last edited by fpbrooks; 2008-06-29 at 12:58.
|
|
2008-06-29
, 21:26
|
|
Posts: 49 |
Thanked: 13 times |
Joined on Dec 2007
@ Texas
|
#28
|
Its a bug for sure. I turned off my N800 yesterday and started it up with the camera in, the screen doesn't auto flip and auto start. 
The instructions work only for a workaround. I think if you complete the instructions and keep the N800 on stand by and not completely turn it off, it should work. Overall, just wait for an update.
The instructions work only for a workaround. I think if you complete the instructions and keep the N800 on stand by and not completely turn it off, it should work. Overall, just wait for an update.
__________________
rubiks == skibur = skybur != skeebur
"Life is too short to waste on sleep" - Johnny Cunningham
http://www.skibur.com
rubiks == skibur = skybur != skeebur
"Life is too short to waste on sleep" - Johnny Cunningham
http://www.skibur.com
 |
|
2008-07-01
, 02:51
|
|
Posts: 1,390 |
Thanked: 642 times |
Joined on Nov 2007
@ California USA
|
#29
|
when I rechecked now, the camera now works fine. My N800 did do several auto updates but not to the camera application.
|
|
2008-07-01
, 04:25
|
|
Posts: 11 |
Thanked: 1 time |
Joined on Jan 2008
|
#30
|
I had this bug too...removed the camera app and it went away.
But I do believe I have it fixed. I removed the camera app, shutdown the tablet and removed the battery for 10 minutes. The camera appears to working correctly, I'll check it again tomorrow.