Active Topics

 


Page 23 of 42 « First 132122 23 242533 Last »
Reply
Thread Tools
mveplus's Avatar
mveplus is offline mveplus
2011-04-25 , 13:52
Posts: 66 | Thanked: 77 times | Joined on Jul 2010 @ intheclouds
#221
Originally Posted by jackjohn View Post
Dear Guys,,

Its still not working. Really need your assistance since this the only type that been sell. Really need to get this adapter work.

FYI. i had copy the usbnet.ko to /lib/modules/2.6.28.10power46 and copy the file sr9600.ko to /home/opt/usb2net/module and opt/usb2net/module and after i run insmode sr9600;ko at both location i get same error "inserting sr9600.ko:-1 unknown symbol in module" and under dmesg it just show 1 error [81459.421966] sr9600: Unknown symbol __bad_udelay"
Hi Jackjohn, I fas so in a hurry that I compiled something that is already there usbnet.ko, is included by default, so the only thin you need to do is to modprobe usbnet, however this will not make your adapter to work. It's based on
* Davicom DM9601 USB 1.1 10/100Mbps Ethernet devices, but is using chip sr9600 which is the "'same copy" but I do not really know why is not working, may be different registry addressing or similar. Look your source code sr9600.c, second row is the email of the guy that wrote this driver, your best bet is to contact him.
Quick search in google - revile that it has something to do with kernel and architecture AMR ? I look trough the code but as I said before I do not write "C" code so I can not help further...

Greetings, mveplus
__________________
mveplus

[SIZE="2"]Nokia N900 - H-E-N is here, NEXT STEP - Spacecraft control
Nothing is impossible for those who believe...
Sick form crappy VPS providers? Try this guys, they know what they are doing!
 
sudarsan_avs is offline sudarsan_avs
2011-04-25 , 14:31
Posts: 91 | Thanked: 16 times | Joined on Mar 2011
#222
Hi Guys,

Need your help, i am unable to connect to USB mouse or Pen drive. I have installed the HEN, extmou and tried opening the cursor and the run the HEN but my mouse is not detected. Attached the log file for your reference, awaiting for your response.. Thanks in advance...

Code:
 7 ports 1 chg 0002 evt 0000

[ 4986.916290] usb 1-1: new high speed USB device using musb_hdrc and address 75
[ 4987.041229] usb 1-1: device descriptor read/64, error -71
[ 4987.275665] usb 1-1: device descriptor read/64, error -71
[ 4987.510009] usb 1-1: new high speed USB device using musb_hdrc and address 76
[ 4987.931945] usb 1-1: device not accepting address 76, error -71
[ 4988.057067] usb 1-1: new high speed USB device using musb_hdrc and address 77
[ 4988.478820] usb 1-1: device not accepting address 77, error -71
[ 4988.478942] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 4988.479003] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 4988.479034] hub 1-0:1.0: port 1 enable change, status 00000501
[ 4991.197448] hub 1-0:1.0: hub_suspend
[ 4991.197509] usb usb1: bus auto-suspend
[ 4991.197509] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[ 4991.197540] usb usb1: bus suspend fail, err -16
[ 4991.197570] hub 1-0:1.0: hub_resume
[ 4991.197631] hub 1-0:1.0: port 1: status 0501 change 0000
[ 4991.197692] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 4991.197723] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 4991.322479] usb 1-1: new high speed USB device using musb_hdrc and address 78
[ 4991.447509] usb 1-1: device descriptor read/64, error -71
[ 4991.681915] usb 1-1: device descriptor read/64, error -71
[ 4991.916290] usb 1-1: new high speed USB device using musb_hdrc and address 79
[ 4992.041290] usb 1-1: device descriptor read/64, error -71
[ 4992.276489] usb 1-1: device descriptor read/64, error -71
[ 4992.510040] usb 1-1: new high speed USB device using musb_hdrc and address 80
[ 4992.931915] usb 1-1: device not accepting address 80, error -71
[ 4993.056884] usb 1-1: new high speed USB device using musb_hdrc and address 81
[ 4993.478698] usb 1-1: device not accepting address 81, error -71
[ 4993.478790] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 4993.478820] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 4993.478851] hub 1-0:1.0: port 1 enable change, status 00000501
[ 4996.197387] hub 1-0:1.0: hub_suspend
[ 4996.197448] usb usb1: bus auto-suspend
[ 4996.197448] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[ 4996.197479] usb usb1: bus suspend fail, err -16
[ 4996.197509] hub 1-0:1.0: hub_resume
[ 4996.197540] hub 1-0:1.0: port 1: status 0501 change 0000
[ 4996.197601] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 4996.197631] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 4996.322540] usb 1-1: new high speed USB device using musb_hdrc and address 82
[ 4996.447540] usb 1-1: device descriptor read/64, error -71
[ 4996.681915] usb 1-1: device descriptor read/64, error -71
[ 4996.916290] usb 1-1: new high speed USB device using musb_hdrc and address 83
[ 4997.041290] usb 1-1: device descriptor read/64, error -71
[ 4997.275726] usb 1-1: device descriptor read/64, error -71
[ 4997.510101] usb 1-1: new high speed USB device using musb_hdrc and address 84
[ 4997.931823] usb 1-1: device not accepting address 84, error -71
[ 4998.057586] usb 1-1: new high speed USB device using musb_hdrc and address 85
[ 4998.478790] usb 1-1: device not accepting address 85, error -71
[ 4998.478912] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 4998.478973] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 4998.479034] hub 1-0:1.0: port 1 enable change, status 00000501
[ 5001.197479] hub 1-0:1.0: hub_suspend
[ 5001.197540] usb usb1: bus auto-suspend
[ 5001.197570] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[ 5001.197631] usb usb1: bus suspend fail, err -16
[ 5001.197662] hub 1-0:1.0: hub_resume
[ 5001.197723] hub 1-0:1.0: port 1: status 0501 change 0000
[ 5001.197814] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 5001.197906] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 5001.322540] usb 1-1: new high speed USB device using musb_hdrc and address 86
[ 5001.447540] usb 1-1: device descriptor read/64, error -71
[ 5001.681915] usb 1-1: device descriptor read/64, error -71
[ 5001.916259] usb 1-1: new high speed USB device using musb_hdrc and address 87
[ 5002.041473] usb 1-1: device descriptor read/64, error -71
[ 5002.275817] usb 1-1: device descriptor read/64, error -71
[ 5002.510101] usb 1-1: new high speed USB device using musb_hdrc and address 88
[ 5002.932678] usb 1-1: device not accepting address 88, error -71
[ 5003.056945] usb 1-1: new high speed USB device using musb_hdrc and address 89
[ 5003.478759] usb 1-1: device not accepting address 89, error -71
[ 5003.478881] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5003.478942] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5003.479003] hub 1-0:1.0: port 1 enable change, status 00000501
[ 5006.197448] hub 1-0:1.0: hub_suspend
[ 5006.197509] usb usb1: bus auto-suspend
[ 5006.197540] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[ 5006.197570] usb usb1: bus suspend fail, err -16
[ 5006.197570] hub 1-0:1.0: hub_resume
[ 5006.197631] hub 1-0:1.0: port 1: status 0501 change 0000
[ 5006.197692] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 5006.197723] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 5006.322570] usb 1-1: new high speed USB device using musb_hdrc and address 90
[ 5006.447540] usb 1-1: device descriptor read/64, error -71
[ 5006.681884] usb 1-1: device descriptor read/64, error -71
[ 5006.916229] usb 1-1: new high speed USB device using musb_hdrc and address 91
[ 5007.041229] usb 1-1: device descriptor read/64, error -71
[ 5007.275604] usb 1-1: device descriptor read/64, error -71
[ 5007.510040] usb 1-1: new high speed USB device using musb_hdrc and address 92
[ 5007.931884] usb 1-1: device not accepting address 92, error -71
[ 5008.056915] usb 1-1: new high speed USB device using musb_hdrc and address 93
[ 5008.478729] usb 1-1: device not accepting address 93, error -71
[ 5008.478851] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5008.478912] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5008.478973] hub 1-0:1.0: port 1 enable change, status 00000501
[ 5011.197509] hub 1-0:1.0: hub_suspend
[ 5011.197601] usb usb1: bus auto-suspend
[ 5011.197631] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[ 5011.197692] usb usb1: bus suspend fail, err -16
[ 5011.197692] hub 1-0:1.0: hub_resume
[ 5011.197784] hub 1-0:1.0: port 1: status 0501 change 0000
[ 5011.197875] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 5011.197937] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 5011.322601] usb 1-1: new high speed USB device using musb_hdrc and address 94
[ 5011.447601] usb 1-1: device descriptor read/64, error -71
[ 5011.681976] usb 1-1: device descriptor read/64, error -71
[ 5011.916229] usb 1-1: new high speed USB device using musb_hdrc and address 95
[ 5012.041442] usb 1-1: device descriptor read/64, error -71
[ 5012.275726] usb 1-1: device descriptor read/64, error -71
[ 5012.510101] usb 1-1: new high speed USB device using musb_hdrc and address 96
[ 5012.931945] usb 1-1: device not accepting address 96, error -71
[ 5013.056945] usb 1-1: new high speed USB device using musb_hdrc and address 97
[ 5013.478881] usb 1-1: device not accepting address 97, error -71
[ 5013.479034] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5013.479064] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5013.479125] hub 1-0:1.0: port 1 enable change, status 00000501
[ 5016.197509] hub 1-0:1.0: hub_suspend
[ 5016.197601] usb usb1: bus auto-suspend
[ 5016.197631] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[ 5016.197662] usb usb1: bus suspend fail, err -16
[ 5016.197692] hub 1-0:1.0: hub_resume
[ 5016.197784] hub 1-0:1.0: port 1: status 0501 change 0000
[ 5016.197875] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 5016.197937] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 5016.322662] usb 1-1: new high speed USB device using musb_hdrc and address 98
[ 5016.447601] usb 1-1: device descriptor read/64, error -71
[ 5016.681854] usb 1-1: device descriptor read/64, error -71
[ 5016.916259] usb 1-1: new high speed USB device using musb_hdrc and address 99
[ 5016.978881] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 5017.041290] usb 1-1: device descriptor read/64, error -71
[ 5022.150909] usb 1-1: khubd timed out on ep0in len=0/64
[ 5027.150756] usb 1-1: khubd timed out on ep0in len=0/64
[ 5027.213226] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 5027.275726] usb 1-1: device descriptor read/64, error -19
[ 5027.447509] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 5027.510101] usb 1-1: new high speed USB device using musb_hdrc and address 100
[ 5027.931884] usb 1-1: device not accepting address 100, error -19
[ 5027.994445] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 5028.056976] usb 1-1: new high speed USB device using musb_hdrc and address 101
[ 5028.478851] usb 1-1: device not accepting address 101, error -19
[ 5028.478942] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5028.479003] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5028.479064] hub 1-0:1.0: port 1 enable change, status 00000501
[ 5031.197570] hub 1-0:1.0: hub_suspend
[ 5031.197631] usb usb1: bus auto-suspend
[ 5035.071289] usb usb1: usb resume
[ 5035.088043] hub 1-0:1.0: hub_resume
[ 5035.088104] hub 1-0:1.0: port 1: status 0101 change 0001
[ 5035.197418] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 5035.197448] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 5035.260192] musb_h_ep0_irq 1083: no URB for end 0
[ 5035.322631] usb 1-1: new high speed USB device using musb_hdrc and address 102
[ 5035.471832] usb 1-1: default language 0x0409
[ 5035.474060] usb 1-1: uevent
[ 5035.474273] usb 1-1: usb_probe_device
[ 5035.474304] usb 1-1: configuration #1 chosen from 1 choice
[ 5035.474456] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 5035.474700] usb 1-1:1.0: uevent
[ 5035.474945] libusual 1-1:1.0: usb_probe_interface
[ 5035.475006] libusual 1-1:1.0: usb_probe_interface - got id
[ 5035.475189] usb-storage 1-1:1.0: usb_probe_interface
[ 5035.475250] usb-storage 1-1:1.0: usb_probe_interface - got id
[ 5035.575561] scsi7 : SCSI emulation for USB Mass Storage devices
[ 5035.581970] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '102'
[ 5035.582672] usb 1-1: New USB device found, idVendor=0a16, idProduct=1200
[ 5035.582733] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5035.582763] usb 1-1: Product: TDZAPG4
[ 5035.582794] usb 1-1: Manufacturer: TREK
[ 5035.582794] usb 1-1: SerialNumber: f9d7ac053455f6
[ 5035.582855] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5035.582946] hub 1-0:1.0: port 1 enable change, status 00000503
[ 5035.614562] usb-storage: device found at 102
[ 5035.614624] usb-storage: waiting for device to settle before scanning
[ 5040.613159] usb-storage: device scan complete
[ 5040.615081] scsi 7:0:0:0: Direct-Access     TREK     TDZAPG4          1.00 PQ: 0 ANSI: 2
[ 5040.636291] sd 7:0:0:0: [sda] 1974271 512-byte hardware sectors: (1.01 GB/963 MiB)
[ 5040.636840] sd 7:0:0:0: [sda] Write Protect is off
[ 5040.636901] sd 7:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 5040.636932] sd 7:0:0:0: [sda] Assuming drive cache: write through
[ 5040.644287] sd 7:0:0:0: [sda] 1974271 512-byte hardware sectors: (1.01 GB/963 MiB)
[ 5040.644805] sd 7:0:0:0: [sda] Write Protect is off
[ 5040.644836] sd 7:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 5040.644866] sd 7:0:0:0: [sda] Assuming drive cache: write through
[ 5040.644897]  sda: sda1
[ 5040.769805] sd 7:0:0:0: [sda] Attached SCSI removable disk
[ 5078.587493] Forced hostmode error: no device attached
[ 5078.587615] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5078.587677] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 5078.587677] usb 1-1: USB disconnect, address 102
[ 5078.587707] usb 1-1: unregistering device
[ 5078.587707] usb 1-1: usb_disable_device nuking all URBs
[ 5078.587738] usb 1-1: unregistering interface 1-1:1.0
[ 5078.610717] usb 1-1:1.0: uevent
[ 5078.611541] usb 1-1: uevent
[ 5078.767822] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 5078.892761] usb 1-1: new high speed USB device using musb_hdrc and address 103
[ 5079.042022] usb 1-1: default language 0x0409
[ 5079.043243] usb 1-1: uevent
[ 5079.043365] usb 1-1: usb_probe_device
[ 5079.043395] usb 1-1: configuration #1 chosen from 1 choice
[ 5079.043487] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 5079.043609] usb 1-1:1.0: uevent
[ 5079.043731] libusual 1-1:1.0: usb_probe_interface
[ 5079.043762] libusual 1-1:1.0: usb_probe_interface - got id
[ 5079.048248] usb-storage 1-1:1.0: usb_probe_interface
[ 5079.048339] usb-storage 1-1:1.0: usb_probe_interface - got id
[ 5079.051635] scsi8 : SCSI emulation for USB Mass Storage devices
[ 5079.058898] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '103'
[ 5079.059265] usb 1-1: New USB device found, idVendor=0a16, idProduct=1200
[ 5079.059295] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5079.059326] usb 1-1: Product: TDZAPG4
[ 5079.059326] usb 1-1: Manufacturer: TREK
[ 5079.059356] usb 1-1: SerialNumber: f9d7ac053455f6
[ 5079.059356] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5079.059417] hub 1-0:1.0: port 1 enable change, status 00000503
[ 5079.065979] usb-storage: device found at 103
[ 5079.065979] usb-storage: waiting for device to settle before scanning
[ 5081.891723] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
[ 5085.066223] usb-storage: device scan complete
[ 5091.260192] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 5091.322631] usb 1-1: reset high speed USB device using musb_hdrc and address 103
[ 5096.322418] usb 1-1: usb-storage timed out on ep0in len=0/64
 
biketool is offline biketool
2011-04-25 , 17:46
Posts: 1,417 | Thanked: 2,619 times | Joined on Jan 2011 @ Touring
#223
I had H-E-N working and could mount some flash drives or a keyboard. After I broke off my USB port and re-soldered it I can connect to a Linux box in slave mode and browse my N900 but I cant attach devices in h-e-n anymore. I even tried reinstalling kernel-power and h-e-n. I cant imagine this is a hardware issue but am not sure what the issue is or even if it is connected to the broken USB port since it has been a while since I have used h-e-n.
I actually get some response from the kernel messages screen saying a forced hostmode error high speed selected but full/low speed device attached. I also don't get any LED's on the flash drive or my still not working USB-RJ-45 wired ethernet adapter when I switch v-boost on.
since I have every expectation of fixing the problem I am also curious if there will be an upgrade to the kernel module to allow rw from flash drives.
 
jackjohn is offline jackjohn
2011-04-26 , 01:01
Posts: 50 | Thanked: 6 times | Joined on Nov 2010
#224
Originally Posted by mveplus View Post
Hi Jackjohn, I fas so in a hurry that I compiled something that is already there usbnet.ko, is included by default, so the only thin you need to do is to modprobe usbnet, however this will not make your adapter to work. It's based on
* Davicom DM9601 USB 1.1 10/100Mbps Ethernet devices, but is using chip sr9600 which is the "'same copy" but I do not really know why is not working, may be different registry addressing or similar. Look your source code sr9600.c, second row is the email of the guy that wrote this driver, your best bet is to contact him.
Quick search in google - revile that it has something to do with kernel and architecture AMR ? I look trough the code but as I said before I do not write "C" code so I can not help further...

Greetings, mveplus
Dear Mveplus,

Thanks a lot for your assistance. Really appreciated that.

Anyway can you confirm is there any wrong config in the z98_usbEth.rules.

And can you provide the step by step before and until i run the h-e-n. Maybe i had miss some step.

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
#Installed as part of the usbLAN package

#UDEV rules to bring up and shutdown Eth0 interface when USB network adapter is
SUBSYSTEMS=="usb", ATTRS{idProduct}=="8150", ACTION=="add", RUN+="/usr/sbin/usb

SUBSYSTEMS=="usb", ATTRS{idProduct}=="7830", ACTION=="add", RUN+="/usr/sbin/usb

SUBSYSTEMS=="usb", ATTRS{idProduct}=="8101", ACTION=="add", RUN+="/usr/sbin/usb

SUBSYSTEMS=="usb", ACTION=="remove", RUN+="/usr/sbin/usbEthDown.sh"
~
 
jackjohn is offline jackjohn
2011-04-26 , 09:14
Posts: 50 | Thanked: 6 times | Joined on Nov 2010
#225
Dear Mveplus,

I had purchased new usb adapter managed to get ip when connected to linux dhcp server but when i connected to normal cisco router iam not managed to get the IP with dmesg eth0: no IPv6 routers present and /etc/udhcpc/default.script: exec: line 7: /etc/udhcpc/default.zeroconf: not found.

How to disable the IPV6? and also regarding the missing file default.zeroconf: not found



2.6.28/drivers/usb/core/inode.c: creating file '003'
[ 852.006439] usb 1-1: New USB device found, idVendor=9710, idProduct=7830
[ 852.006469] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 852.006500] usb 1-1: Product: USB-MAC Controller
[ 852.006500] usb 1-1: Manufacturer: Moschip Semiconductor
[ 852.006530] usb 1-1: SerialNumber: 6e0002c5

ome/user # udhcpc
udhcpc (v0.9.9-pre) started
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Lease failed:
zeroconf: address selected is 169.254.59.32
zeroconf: state is Active/Announce, Link-local address 169.254.59.32
bogus packet, option fields too long: Read past the packet length when getting option 0x1 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x2 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x3 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x4 (308 >= 308)
bogus packet, option fields too long: Read past the packet length when getting option 0x5 (308 >= 308)
/etc/udhcpc/default.script: exec: line 7: /etc/udhcpc/default.zeroconf: not found

1704.260009] eth0: no IPv6 routers present
[ 1934.111663] slide (GPIO 71) is now closed
[ 1943.283477] proximity (GPIO 89) is now closed
[ 1944.722686] proximity (GPIO 89) is now open
[ 1996.363342] proximity (GPIO 89) is now closed
[ 2000.596069] proximity (GPIO 89) is now open
[ 2039.041351] slide (GPIO 71) is now open
/home/user #
Attached Images
 
 
jackjohn is offline jackjohn
2011-04-27 , 01:10
Posts: 50 | Thanked: 6 times | Joined on Nov 2010
#226
Dear Mveplus,

Its because of the MAC address filtering at Router. No issue. work like charm,

Anyway need to know how to configure static IP and DNS.
 
NiQ is offline NiQ
2011-05-01 , 16:15
Posts: 102 | Thanked: 140 times | Joined on Sep 2010 @ Israel
#227
To set static IP address root yourself then type:
Code:
ifconfig eth0 <ip-address> netmask <subnet-mask>
ifconfig eth0 up
Also add default gateway if you want Internet access:
Code:
route add default gw <default-gateway>
To specify DNS servers edit /etc/resolv.conf

Or, if you want the settings to persist reboots, just edit /etc/network/interfaces then type:
Code:
ifup eth0
Cheers.
Last edited by NiQ; 2011-05-01 at 16:16. Reason: typo.
 
jackjohn is offline jackjohn
2011-05-04 , 08:43
Posts: 50 | Thanked: 6 times | Joined on Nov 2010
#228
Dear NiQ,

Noted and thanks
 
cheve is offline cheve
2011-05-05 , 19:52
Posts: 362 | Thanked: 143 times | Joined on Mar 2008
#229
i am happy to report that h.e.n work my N900 with the following:
1. a SSD(Intel X25-M 120GB 2.5") without using additional power supply. I got about 1.5hr of play time from playing mp3 off the SSD from full charge and speaker on.

2. a powered hub where it is connected to a Seagate 750GB 2.5" SATA drive and a cheap multi-format memory card reader(ie. CF, SDHC etc) at the same time; thus allowing transfers of content from the memory cards to the drive directly.

cheers

ps: both drives are in 2.5" h/d enclosure, with JMicron USB to ATA/ATAPI Bridge
Last edited by cheve; 2011-05-09 at 03:42.
 
cheve is offline cheve
2011-05-09 , 03:32
Posts: 362 | Thanked: 143 times | Joined on Mar 2008
#230
All,

I have a few questions about charging while USB host is enabled. I have read the post http://talk.maemo.org/showpost.php?p...&postcount=647. I have a few things that I do not understanding..

1. jOERG mentioned about booston and boostoff script, are they provided?

2. jOERG's post point to the http://enivax.net/jk/n900/charge.sh.txt. My guess is that I need to download the charge.sh.txt to N900, then rename it as charge.sh and then run it. The question is where should this script reside in the N900.

3. What is the exact command at the x-term to run the charge.sh?
should it be "charge"
or
"charge &"

4. If the device that I want to use requires power itself(ie. usb harddrive); how does one setup charging under this scenario?

thanks
 
Reply
Page 23 of 42 « First 132122 23 242533 Last »

Tags
awesome!, bada rox, h-e-n hostmode, more noise

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 21:52.

Contact Us - Home - Archive - Top