Gluz
|
2007-11-14
, 00:00
|
Posts: 46 |
Thanked: 1 time |
Joined on Jan 2007
@ Tampere, Finland
|
#301
|
|
2007-11-14
, 00:06
|
Posts: 46 |
Thanked: 15 times |
Joined on Feb 2007
|
#302
|
|
2007-11-14
, 00:06
|
|
Posts: 186 |
Thanked: 5 times |
Joined on Feb 2007
@ Canada
|
#303
|
|
2007-11-14
, 00:12
|
Posts: 228 |
Thanked: 20 times |
Joined on Oct 2007
|
#304
|
|
2007-11-14
, 00:15
|
|
Posts: 2,869 |
Thanked: 1,784 times |
Joined on Feb 2007
@ Po' Bo'. PA
|
#305
|
The software on your Nokia N800 was not updated, because the update file is not supported by your device.
|
2007-11-14
, 00:16
|
Posts: 228 |
Thanked: 20 times |
Joined on Oct 2007
|
#306
|
|
2007-11-14
, 00:19
|
Posts: 228 |
Thanked: 20 times |
Joined on Oct 2007
|
#307
|
|
2007-11-14
, 00:20
|
Posts: 121 |
Thanked: 172 times |
Joined on Mar 2007
@ sofia, bulgaria
|
#308
|
|
2007-11-14
, 00:22
|
Posts: 144 |
Thanked: 21 times |
Joined on Mar 2007
@ Finland
|
#309
|
|
2007-11-14
, 00:24
|
|
Posts: 2,869 |
Thanked: 1,784 times |
Joined on Feb 2007
@ Po' Bo'. PA
|
#310
|
The word is out about the N800 update
http://www.cnet.com/surveillance-sta....html?tag=head
This afternoon, members of the Internet Tablet Talk forum website posted a link to the much anticipated 2008 update of the N800/N810 software along with some fairly nudge-nudge wink-wink instructions for evading the serial number check...
Go to the N810 software download page...
....Download the file named "RX-44_2008SE_1.2007.42-18_PR_COMBINED_MR0_ARM.bin"
Download the latest firmware upgrading software, 'flasher-3.0'.
Now that you have the firmware flasher and the 2008 N800 software update in the same directory, open up a terminal (on a Linux desktop/laptop) and type:
chmod a+x ./flasher-3.0
./flasher-3.0 -u -F RX-44_2008SE_1.2007.42-18_PR_COMBINED_MR0_ARM.bin
That will unpack the software, and may take a few seconds. Once that is done, plug the N800 into your computer using the included USB cable, reboot the Nokia device while holding the home button. Now, execute the following commands:
./flasher-3.0 --enable-rd-mode
./flasher-3.0 -k zImage -f
./flasher-3.0 -n initfs.jffs2 -f
./flasher-3.0 -r rootfs.jffs2 -f -R
That should be it. Your device should now boot up with the new 2008 version of the Nokia Maemo OS.