Thread
:
[Problem]Flashing Nokia N9 - downgrade disallowed
View Single Post
flashmania
2012-01-27 , 10:29
Posts: 3 | Thanked: 0 times | Joined on Jan 2012 @ Argentina
#
13
Hi, while flashing my N9, after a "apt-get autoremove" of death which left my phone bricked, I am seeing "Downgrade disallowed" but to my knowledge the versions are ok.
Basically it's a N9 coded 059L4L3, Argentina. I try to flash the firmware:
DFL61_HARMATTAN_20.2011.40-4.348.1_PR_LEGACY_348_ARM_RM-696_PRD_signed.bin
obtained from navifirm (I've tried both production-external and nokia-care)
and I am getting the following error:
desktop:/float/download/n9/firmware/image_20_nokia_care$ sudo flasher -f -F DFL61_HARMATTAN_20.2011.40-4.348.1_PR_LEGACY_348_ARM_RM-696_PRD_signed.bin -F DFL61_HARMATTAN_20.2011.40-4.NOMAPS_EMMC_NOMAPS.bin -R
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 038.
Device identifier: XXXXXXXXX (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.1.5
Version of 'sw-release': DFL61_HARMATTAN_20.2011.40-4.348.1_PR_348
Sending ape-algo image (7039 kB)...
100% (7039 of 7039 kB, avg. 25504 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 001, device address 039.
Device identifier: XXXXXXXXX (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.6.3
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_20.2011.40-4.348.1_PR_348
Image moslo not present
Image tar skipped
Image config skipped
Battery level 65 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure
image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1325643235)
[Pipe 0] Finishing in error state with status 10
========================================
ERROR: Failed to flash images
From what I can tell it's the same version already in the device, DFL61_HARMATTAN_20.2011.40-4.348.1_PR_348, could anybody help me understand why am I seeing "Downgrade disallowed", and more important how to fix it?
The same error is shown when I don't use the eMMC image. For the record I am using Linux Ubuntu 2.6.38-8-generic 64 bits, and the phone isn't booting.
Thanks,
Sebastian.
Quote & Reply
|
flashmania
View Public Profile
Find all posts by flashmania