View Single Post
Posts: 440 | Thanked: 2,256 times | Joined on Jul 2014
#16
Ok I've made some headway into the boot failure problem and I'm uploading a 2.1.3.7 image for scorpion_windy which i'll edit this post with once its done.

This image may take a few attempts before it boots fully, but I've altered the init script with a LED light sequence so we can tell what its doing.

The sequence is:
Power on -> Orange LED -> Aqua LED -> Purple LED -> Off -> White LED

This should happen in reasonably quick succession and so if it hangs at the Orange or Aqua stages for more than 10 seconds then it is most likely stuck and needs to be turned off by holding VOL UP + POWER until it shuts off.

I haven't seen it get stuck at the Purple or White stages, so if you see those it should finish booting ok.

To Flash the Image first we need to put on AOSP6 by unpacking the tarball and using fastboot as follows:

fastboot –S 256M flash boot boot.img
fastboot –S 256M flash system system.img
fastboot –S 256M flash userdata userdata.img

and then you can flash the SailfishOS .zip as per usual through TWRP.

EDIT:

Downloads Here
__________________
SirenSong v0.5
Like my work? buy me a beer

Last edited by r0kk3rz; 2018-04-21 at 13:48.
 

The Following 4 Users Say Thank You to r0kk3rz For This Useful Post: