Thread
:
Nwer OpenSSL on Maemo Fremantle
View Single Post
endsormeans
2018-10-25 , 10:03
Posts: 3,139 | Thanked: 8,156 times | Joined on Feb 2013 @ From my Gabriola Island hermitage, near the Edge of the World
#
23
Hm..
easier solution?
Actually ...
if you open up the cover that exposes the battery..
(make sure you have a nice clean flat area of ..say your kitchen table for this...don't want to be missing parts...)
Take the batt out...
remove the screws holding the assembly in...
Now you will notice an off - fuchsia colored wire, beside a deep magenta coupling.
Just go and rip that off - fuchsia colored wire right out...
Tie it in a bow on your left pinkie toe ...
and then put back the assembly and the batt. cover back on.
openssl should work now...
but only as long as the off - fuchsia colored wire tied in a bow on your left pinkie toe is within exactly 1.24 feet of the n900
Proximity issue ...
So you may need to figure out exactly how to walk and keep the device within left - pinkie - toe range.
There we go.
Much easier eh?
__________________
Lurker since 2007, Member since 2013, Certifiable since 1972
Owner of :
1-n770
(in retirement),
3-n800's
/
3-n810's
(still in daily use),
5-n900's
((3 are flawless, 1 loose usb ( parts), 1 has no telephony (parts))
3-nexus 5's
: 1 w/ Floko Pie 9.1 (running beautifully) waiting for Stable Droid 10 rom, 1 w/ ̶Ubuntu Touch, 1 with Maru OS (intend maemo leste when ready)
1/2 - neo900
pre- "purchased" in 2013. N̶o̶w̶ ̶A̶w̶a̶i̶t̶i̶n̶g̶ ̶r̶e̶f̶u̶n̶d̶ ̶p̶r̶o̶c̶e̶s̶s̶ ̶l̶a̶s̶t̶ ̶f̶e̶w̶ ̶y̶e̶a̶r̶s̶ - neo900 start up declared officially dead -
Lost invested funds.
PIMP MY N8X0
(Idiot's Guide and a video walkthrough)
http://talk.maemo.org/showthread.php?t=94294
THE LOST GRONMAYER CATALOGS
http://talk.maemo.org/showthread.php...ight=gronmayer
N8X0 VIDEO ENCODING THE EASY WAY
http://talk.maemo.org/showthread.php...ght=mediacoder
242gb ON N800
http://talk.maemo.org/showthread.php?t=90634
THE PAIN-FREE MAEMO DEVELOPMENT LIVE DISTRO-ISO FOR THE NOOB TO THE PRO
http://talk.maemo.org/showthread.php?t=95567
AFFORDABLE MASS PRODUCTION FOR MAEMO PARTS
http://talk.maemo.org/showthread.php?t=93325
Meateo balloons now available @ Dave999's Meateo Emporium
Quote & Reply
|
The Following 2 Users Say Thank You to endsormeans For This Useful Post:
juiceme
,
peterleinchen
endsormeans
View Public Profile
Send a private message to endsormeans
Find all posts by endsormeans