For the connection between the upper and lower part (slide+hinge mechanism) I am still looking for a suitable cable. Specs: -about 50mm -at least 5 tracks -at most 10mm wide -equal or more than 0.5mm pitch -ZIF/LIF/Soldertab ends -cheap -available -bending radius of 1-1.5 mm for dynamic loads and the connector -1mm max from pcb -fits above cable -cheap -available anyone? it needs to fulfill all the criteria! http://www.globalconnectortechnology...sage-guide.jpg (flex cable in pink) http://oi41.tinypic.com/2vijpsy.jpg