View Single Post
Posts: 120 | Thanked: 843 times | Joined on Jul 2015 @ Berlin, Germany
#1
UPDATE: If your bootloader is still locked or if you updated to firmware 34.3.A.0.228 or newer before unlocking consider following the official
linux-instructions
instead! Otherwise their guide recommends using windows for updating so in that case this one is still useful if you don't want to deal with windows.

This is an unofficial Guide for installing the official Sailfish X image on your Xperia X (single sim-version, it might possibly work with the dual-sim version but that's untested) using Linux/MacOS.

Some people are reporting that this guide also works with the dual-sim version.

Please keep in mind that while I don't think it is possible to accidentally permanently damage your phone by following this tutorial it's still you who does the flashing and since these are unofficial instructions neither me nor Jolla is responsible for any damage that might happen in the process.

If your bootloader is still locked updating to the latest android-ota eliminates the need for the flashtool step (do the update before unlocking the bootloader). It may be needed to update multiple times (until android doesn't find any new updates anymore) so don't assume that you're done after updating once.

If you haven't already unlocked your bootloader you may want to consider backing up your drm-keys first.

First we'll need to unlock the bootloader, this will void your guarantee (at least officially, in some places this is not enforceable).

If you already unlocked our bootloader you can skip to the flashtool-step.

It will also will erase your drm-keys from your phone! They'll be lost forever unless you backed them up! (irrelevant for sailfish x but backing them up might be useful if you ever want to use stock android again)

Go to the developer-settings in Android (can be made visible by repeatedly tapping the build-version in the settings) and activate OEM unlock.

After that we'll need to install fastboot on your computer. To do that on Ubuntu/Debian run

Code:
sudo apt install android-tools-fastboot
On MacOS install homebrew and run

Code:
brew cask install android-platform-tools
Obtain your unlock-key by following the instructions here.

Get the device into fastboot mode by fully turning it off and plugging in the power-cable while holding volume up.

Run
Code:
fastboot oem unlock 0xYOUR_KEY
on MacOS and
Code:
sudo fastboot oem unlock 0xYOUR_KEY
on linux.

Congrats! Your bootloader is now unlocked

We will download and install the newest official firmware from Sony which allows flashing to a special partition (on Windows this step is done using Emma, but we don't have that on Linux/MacOS so we'll use the unofficial flashtool).

Download and install the unofficial flashtool for your platform.

Download this image (mirror, mirror 2) (source). If you have the dual-sim version (again, untested) you should look for the newest update for the f5122.

Fully turn off your phone.

Open flashtool.

Plug your phone into your computer. Flashtool should now recognize your phone. If it doesn't unplug it again and plug it back in while holding volume-down.

Click on the Flash-Symbol, select Flash Mode, select the folder where you downloaded the file and select the xperia-x firmware (34.3.*). Leave the rest of the settings alone unless you know what you're doing.

Click on the Flash button. This will now install the update so it will take a while. Don't get scared if it's stuck at preparing files for a long time, it's supposed to be that way. If an error pops up (can't quite remember what the message was) select continue.

After this is done unplug your phone, Quit Flashtool (hint for MacOS: cmd-q won't properly exit the program so be sure to click on File->Exit to exit Flashtool) and boot into Android once.

Now fully turn off your phone again and enter fastboot-mode (hold volume-up while plugging in your phone).
The led should now be blue.

Extract the Sailfish-X zip to a location of your choice.

Go to this site, accept the terms and conditions and extract the SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.i mg file to the unpacked folder.

cd to the location where you unpacked the zip and run
Code:
chmod +x flash.sh
to mark the flash.sh as executable.

Now run
Code:
sudo ./flash.sh
on Linux and
Code:
./flash.sh
on MacOS to flash Sailfish OS.

Finally reboot your phone and enjoy Sailfish OS!

Last edited by jakibaki; 2017-10-25 at 06:06.
 

The Following 33 Users Say Thank You to jakibaki For This Useful Post: