View Single Post
Posts: 475 | Thanked: 611 times | Joined on Feb 2012
#31
Originally Posted by deutch1976 View Post
It is now on 2.0 but still can't install nothing to the internal disk.
How your BIOS version show up in BIOS settings is it 2.0 or 2.00-T01?
Try this first (later I give more instruction for test that hardware is fully working):
Boot with Free-DOS 1.3 Live (you can also use USB CD-drive and CD-ROM for boot, remember set it in BIOS settings boot order)
- After boot choose Use Live enviroment
- Write to command line:
fdisk (starts partitioner)
y (large support)
4 (display partition information)
- What total disk space you see? What partition you see?
- Push y-key to see logical drives if there is
- What reading in logical drive system (if there is)?

(you can also boot with USB-floppy drive with Win98SE boot floppy and there should be fdisk to use same way, except show Linux partitions as non-DOS and does not support over 137GB SSD fully)

Originally Posted by deutch1976 View Post
Meego does not boot on Booklet but boots on Asus eee Pc 4g
What Meego version you tested?

Last edited by teroyk; 2023-06-28 at 13:39.
 

The Following User Says Thank You to teroyk For This Useful Post: