maemo.org - Talk - View Single Post - Is it possible to access files on a not booting device? UPDATE: Device won't boot anymore!

	efekt	2011-04-08 , 14:12
	Posts: 422 \| Thanked: 320 times \| Joined on Oct 2009 @ Israel	#26

Originally Posted by 方法ナイフ

Have you tried running the flasher while the phone is disconnected, per the wiki?

Windows:
flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f

Text similar to the following will be displayed on the computer:
flasher v2.5.2 (Oct 21 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Suitable USB device not found, waiting.

Plug in the powered down N900 while holding 'u' key

Of course I tried

I think now I've tried just about anything written in the wiki...

Originally Posted by J4ZZ

I had emmc flashing errors once, too but found out that crossflashing the kernel helped me fixing it. See here: http://talk.maemo.org/showthread.php...592#post975592 Maybe it'll help.
Basically it's flashing Firmware 1.3, then flashing --only kernel from PR1.2, flashing EMMC from PR1.3 and finally flashing kernel from PR1.3 back (or reflash the whole PR1.3 from 1st step will do it too)

Greetz,

..::J4ZZ::..

Thanks man, but it didn't work either - thanks for trying to help!

Btw, in your post on phase 2 ("Flash only Kernel of PR1.2") you have 2 errors - the first one is that the firmware in your example is not PR 1.2, but PR 1.1.1 (this confused me a bit

), and the second one is in the flasher command - you forgot to add "-f" after "--flash-only=kernel". If you don't add the "-f", flasher will say "there was nothing to do" and will quit

__________________
As long as people will accept crap, it will be financially profitable to dispense it...

Quote & Reply |

The Following User Says Thank You to efekt For This Useful Post:
J4ZZ