I'm having some problems now that I have upgraded to PR 1.3. Here's my sequence of events: Under PR 1.2: - followed install instructions that appeared on page 1 of this thread that involved using terminal and unpacking the backupmenu-20101022.tar.gz file (these instructions no longer appear on page 1) - install and backup went fine - subsequent backup failed as N900 would only boot into Maemo - turned out for some reason I needed to re-install bootmenu-n900 (would only work via terminal not App Manager). After this, 2nd backup went fine - updated to PR 1.3 Under PR 1.3 - backup of both Rootfs and Optfs got hung up on the Rootfs backup with the following error that appeared after 10 seconds: ./var/tmp/qcop-server-0: socket ignored The size of the backup increased to 281.2M at 45 sec and nothing would happen after this, other than the time on the timer increasing. Tried a second time with the same results. - Under App Manager, I then installed from extras-devel BackupMenu ver. 0.32-1 - tried another backup of both Rootfs and Optfs with the same error and same result as above Any clue as to why this is happening or what can be done? Thank you.