Thread: N800 & Netgear Router
View Single Post
YoDude's Avatar
YoDude is offline YoDude
2007-04-29 , 11:59
Posts: 2,869 | Thanked: 1,784 times | Joined on Feb 2007 @ Po' Bo'. PA
#9
I use a Netgear WGR614V4 over here that woks just dandy.

From the Router Status page:

Account Name
Firmware Version V5.0_07

Internet Port
MAC Address 00:88:88:88:88:88
IP Address 88.88.88.888
DHCP DHCP Client
IP Subnet Mask 255.255.248.0
Domain Name Server

68.87.64.146
68.87.75.194


LAN Port
MAC Address 00:88:88:88:88:88
IP Address 192.168.0.1
DHCP On
IP Subnet Mask 255.255.255.0

Wireless Port
Name (SSID) YoDude
Region United States
Channel 11
Mode g and b
Wireless AP On
Broadcast Name Off

The broadcast name had to be "ON" for initial set up then the N800's MAC addy was added to "Attached Devices" in "Wireless Access List":

# IP Address Device Name MAC Address
1 192.168.0.2 LAPPY 00:88:88:88:88:88
2 192.168.0.3 FYNSPY 00:88:88:88:88:88
3 192.168.0.4 NOKIAN800 00:88:88:88:88:88
Then turned off to help keep the unwashed masses out on "Advanced Wireless Settings" found in "Wireless Setup"
Last edited by YoDude; 2007-04-29 at 12:02.