Thread: Access Net Thru WinXP-PC Via Disl-Up?
View Single Post
Valeria is offline Valeria
2008-10-19 , 18:21
Posts: 65 | Thanked: 23 times | Joined on Jul 2008 @ Argentina
#11
Originally Posted by nunofyerbisnes View Post
ipconfig on the PC lists the following Ethernet adapter Network Bridge:
Connection-specific DNS suffix…..:
IP Address………………………………...…: 192.168.0.1
Subnet Mask………………………………..: 255.255.255.0
Default Gateway…………………………..: 192.168.1.1

Below is the setup information for the Linksys WAP54G Wireless Access Point:
Basic Settings:
Network…………………….……........…. Static IP
IP Address………………………........... 192.168.1.254
Subnet Mask………………..........…... 255.255.255.0
Default Gateway……………........….. 192.168.1.1
I don't like the IP address part. Shouldn't the AP be something 192.168.0.something other than 1? The subnet mask is 255.255.255.0 so only the last part can be different for devices to see each other. Do a ping from the PC to the address of the AP and try different settings. when it responds OK do ping from the NIT to the PC and see how that works.