Thread: Can I still recover this N9?
View Single Post
Nick999999 is offline Nick999999
2016-08-22 , 20:38
Posts: 6 | Thanked: 6 times | Joined on Aug 2016
#1
So I found my N9 which I had kept in a box somewhere because it had died and wasnt getting detected by the computer and I had switched to android in the mean time.

I wanted to recover it for the sake of the good old days so I hooked it up to the pc just for the heck of it and voila it is getting detected ,though since the battery was dead I tired using:

flasher -i in hopes of charging it but that does nothing.

So I went ahead and tried

flasher -f -F rootfs.bin -F nomaps.bin --flash-only=mmc

This charges the phone thankfully but then it finishes the flashing and the phone is stuck in a reboot loop, the screen doesent even light up ( the led goes from fait to a bright white and then turns off and repeats the process)

Any help would be appreciated.

PS: Since it almost impossible to find the exact firmare anyomre I'm using the below mentioned files from here http://talk.maemo.org/showpost.php?p...00&postcount=1
DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958 and
DFL61_HARMATTAN_40.2012.13-7.NOMAPS_EMMC_NOMAPS

My device variant is 059j1z5 16 GB



Code:
C:\Program Files\Nokia\Flasher>flasher -f -F rootfs.bin -F nomaps.bin --flash-only=mmc
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 27085 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped
Charging battery, 10 % battery level (11 % required). Ctrl-c to exit
Battery level 11 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] mmc          [finished   100 %  261587 /  261587 kB   17371 kB/s]
Success
 

The Following User Says Thank You to Nick999999 For This Useful Post: