Originally Posted by TonyUkuk

40.2012.21.3 N9 RM-696 Country Variant Argentina

Lets try this way, go to this site,then click up there Nokia Firmware,then from the list find Nokia N9 RM-696,from the list of firmwares for N9 find the latest version (which is for now 40.2012.),there will be a list of firmwares for each product code and country variant, find the country variant for argentina, download it and try with this firmware flash your N9. I prefer to do this commands:

Code:

flasher -f -F firmware.bin --erase-user-data=secure
flasher -f -F firmware.bin -F emmc.bin --flash-only=mmc

if no result ( long outputs with pic ) then go here, there will be a list of all N9 product code lists, as I see there are three product codes for Argentina, so download one by one these firmwares and try with the commands up there. longest but easest way to check which one and i hope that your issue tune2fs will be fixed, because this is the problem of rootfs,and if there is problem with flashing rootfs on N9 that mean the issue on firmware or in hardware (flash memory),so we will check with all suitable firmwares for your N9, and if again such errors,then i'm sure that this is the hardware issue(in much times"Tune2fs" error mean bad flash ic block / bad soldered flash ic.),but i think u'll fix it do not forget to flash with these commands up there and also do not forget to download emmc.bin with each downloaded firmware.bin. check it and lets us know. i had such issues and i just telling here thouse things which i did in my practice good lucks.

Also lookup here http://www.mundomeego.com/wp-content...tina_black.png

for read: useful thread about N9 EMMC