Thread
:
How to open the N9 after stripping the T4 screws inside
View Single Post
bobofosho123
2013-06-14 , 20:11
Posts: 31 | Thanked: 4 times | Joined on Sep 2012
#
1
Hi everyone-
I noticed recently that the battery life on my N9 started sucking, i.e. it would drain completely in less than half a day even with light usage. I was almost positive it was a faulty battery so I decided to order one off Ebay and replace it myself. I received the battery in the mail yesterday along with a few screwdrivers that I thought were the correct kind. Only after taking the screen off the phone did I realize that the screws on the N9 were Torx-plus instead of regular T4 screws. As a result, I completely stripped 4 out of the six screws that secure the protective metal cover over the battery and motherboard.
Here's where the story get's interesting, after I stripped the screws I got a dremel tool and cut notches into the tops of each screw so that I could use a flat-head screwdriver to remove them. One of the screws sits right next to the front-facing camera so I had to saw into the camera in the process, completely destroying it. Eventually, after hours of insane effort I finally managed to get all of the screws out and put the new battery in.
As I put the phone back together I accidentally stripped one of the two T4 screws next to the charging port, so now I'm completely baffled as to how I can ever get the phone apart again. Any ideas? Thanks in advance.
-bobofosh123
Quote & Reply
|
The Following User Says Thank You to bobofosho123 For This Useful Post:
Wikiwide
bobofosho123
View Public Profile
Send a private message to bobofosho123
Find all posts by bobofosho123