Thread: N900 - Cannot Boot, but Flash VANILLA and FIASCO done
View Single Post
Jackeye is offline Jackeye
2013-06-02 , 09:18
Posts: 25 | Thanked: 4 times | Joined on Jan 2009
#24
Try to flash VANILLA after FIASCO in non-R&D mode with these details:

Code:
root@ubuntu:/home/ubuntu/Stažené# flasher-3.5 --disable-rd-mode
flasher v2.5.2 (Oct 21 2009)

USB device found found at bus 001, device address 013.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
The device is now in production mode
root@ubuntu:/home/ubuntu/Stažené# flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
flasher v2.5.2 (Oct 21 2009)

Image 'mmc', size 255947 kB
	Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus 001, device address 013.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.

Also I see the problem in RescueOS with charging. When I start the charging script, it wrote some errors, that was not able to read last value. Voltage informations are all on 0 value. After a few tens of minutes N900 goes down (with battery drained). External charger charge battery to full, so it is ok.

Can it be connected with eMMC (VANILLA) flashing (status: "wating for suitable device") and means any HW problem?
Last edited by Jackeye; 2013-06-02 at 09:51.