Nokia N9 Repartition
 

My N9 cannot Flash And Could not Started ........when it boot up freeze with nokia logo then turn off.............and try to vanila flash with all command that are avaliable............but when i flashed zimage moslo and zImage_2.6.32.54-ubiboot-02_301013..........boot up with usb cable it shows some green letter...............and my pc found a 14.7 GB removable drive ...............how can i fix it

Re: Nokia N9 Repartition
 

flasher -F mail.bin -F emmc.bin --erase-user-data=secure --erase-mmc=secure --no-preserve -f -R

Re: Nokia N9 Repartition
 

1st flash told that


Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Warning: user data may reside on MMC. In that case the MMC is unnecessarily erased twice.
Charging battery, 10 % battery level (11 % required). Ctrl-c to exit
Battery level 11 %, continuing.
Erasing, this may take a while.
ERROR: SU_BEGIN_ERASE_REQ terminated with error code 1: Unknown error
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
ioctl(BLKSECDISCARD) failed for /tmp/sudmmc2WMQf8/internal0: Input/output error
========================================
ERROR: Failed to erase MMC using 'secure' method

Re: Nokia N9 Repartition
 

And 2nd trying told that


Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Warning: user data may reside on MMC. In that case the MMC is unnecessarily erased twice.

Battery level 11 %, continuing.
Erasing, this may take a while.
Erase done.

Battery level 11 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3.239.4.4_PR_239
Image moslo not present
Image tar skipped
Image config skipped

Battery level 11 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [writing 57 % 6050 / 6050 kB 3574 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1856 kB/s]
[_] rootfs [init 0 % 32768 / 1170174 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3239 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1856 kB/s]
[f] rootfs [init 0 % 32768 / 1170174 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcCCAykW/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcCCAykW/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
========================================

Re: Nokia N9 Repartition
 

Hi.
I bet you are executing the commands as an unprivileged user: try appending sudo at the beginning of the command. (i.e: execute the flash command as root)

Regards.