Re: [WiP] Porting Emumaster 0.3.0 to Qt5/SailfishOS
 

Hi,

some more notes regarding things I tested with the latest build:

• SNES works on a Nexus5x.
  I did not test anything else due to time constraints.
• SNES and NES do not work on the Jolla Community device
  Both segfault almost immediately.
  I believe this is because the Jolla C uses armv7l, while emumaster requires at least hard float to build.
• Interestingly, PSX works on the Jolla Community device.
  I don't know why PSX works on Jolla C while SNES and NES don't.
  Actually PSX even requires the neon instruction set.

From these results, I'd say that:

• You should be lucky if you have an armv7hl device.
  In this case, my guess is that most things should work.
• The Jolla C does not (well) support emumaster.
  Even though PSX seems to work, I could not get the others NES and SNES to work with a variety of CFLAGS combinations.

Cheers,

Wonko

Re: [WiP] Porting Emumaster 0.3.0 to Qt5/SailfishOS
 

hi Wonko!

And thank you for porting emumaster to SailfishOS.
I installed the latest version from your repository on my jolla. Everything works very well (SNES & psx). However I can't access the keyboard configuration menu. I have a TOHKBD, so I would like to use it! Is it possible to edit the keys directly in the emumaster.conf file?

Cheers!