How to flash N900??
Please tell me how to flash N900.
I have downloaded and installed flasher 3.5 on windows XP.. I have downloaded and copied the latest firmware and copied it to the flasher directory. I run the mobile on Flasher mode and I can see the USB icon on top right corner with Nokia written in centre of screen When I give the command as specified in directory, it gives %m.. I dont know whts is that?? Following is the copy of commands and response from command prompt of Win Xp D:\Program Files\maemo\flasher-3.5>flasher-3.5 -F RX-51_2009SE_3.2010.02-8.003_P R_COMBINED_003_ARM.bin -f -R flasher v2.5.2 (Sep 24 2009) RX-51_2009SE_3.2010.02-8.003_PR_COMBINED_003_ARM.bin: %m D:\Program Files\maemo\flasher-3.5>flasher-3.5 -F RX-51_2009SE_3.2010.02-8.003_P R_COMBINED_003_ARM -f -R flasher v2.5.2 (Sep 24 2009) RX-51_2009SE_3.2010.02-8.003_PR_COMBINED_003_ARM: %m D:\Program Files\maemo\flasher-3.5> |
Re: How to flash N900??
read the wiki on how to do it. There is no short cut here.
http://wiki.maemo.org/Updating_the_tablet_firmware |
Re: How to flash N900??
I read and did all the instructions as you can read my post. But it dont flash... and rather says %m wht is this %m???
|
Re: How to flash N900??
Anyone please answer
|
Re: How to flash N900??
Better yet, read the guide found on Maemocentral.com
Follow those instructions, they are easier to follow...but use the code on the Maemo Wiki guide, as the code on Maemocentral is not 100% correct |
Re: How to flash N900??
run the flasher first before connecting usb to ur device,,
when you r in cmd prompt hold 'u" button on ur n900 and connect the usb . ull get a vibration followed by nokia logo and usb connected logo, release the "u" key and execute ur command! that trick worked for me,, if it fails try another machine |
Re: How to flash N900??
Still giving the same.. I dont know wht does %m means?? :-(
|
Re: How to flash N900??
Quote:
if you are using windows 32bits then you may want to install LibUSB http://wiki.maemo.org/Flasher from there link above, else you will get an error while trying to do it. Turn off the device completely and slide the Keyboard out. Plug the usb in and press U while running the command line. Don't let go of U until it is detected by the windows. |
Re: How to flash N900??
I have a USB icon on the screen Top Right Corner..
I have followed all the instructions as well.. but it dont flash rather give % m as I shown in my first post.. I cannot get another machine as I am not a shopkeeper :-( |
Re: How to flash N900??
Yes Windows XP Version 2008-2009 SP3.
I also have Windows 7 but I am using XP for flashing |
Re: How to flash N900??
Did you read and follow the instructions found at http://maemocentral.com/2010/02/05/h...factory-state/
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
anyone please????????????????????????? :-(
|
Re: How to flash N900??
DONE :-))
Thanks alot |
Re: How to flash N900??
is it a laptop or desktop? laptop use the back USB port for better result.
did you put the image .bin file into C:\program files\maemo\flasher? download the image yet? download it and put in the flasher directory. Then go to run and type CMD. THen you follow the instruction. 1. put the .bin image file into C:\%ProgramFiles%\maemo\flasher-3.5\ 2. make sure your phone battery is atleast halfway. Turn the phone off 3. Open Command line and type: %ProgramFiles%\maemo\flasher-3.5\ 4.Hold the u key on the keyboard of N900 and connect the USB cable at the same time 5. In the commandline run: flasher-3.5.exe -F RX-51_2009SE_3.2010.02-8.003_PR_COMBINED_003_ARM.bin -f -R make sure you type the name correctly. Other wise it won't work. You can try the flasher commands here: http://wiki.maemo.org/Flasher |
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
One thing more please. The contacts doesnot removed.. Dial Log is same as it is.. Pictures in the memory are also there.. How to remove all these??.. I want the whole mobile as I just purchased a new?? I am not using any memory card
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
lol told you to read the wiki carefully. I did ask for verification lol
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
if you want to have a clean device without any software installed and broken codes and if you don't have any important data on the device then go a head :D it's for the best. And once you done it, one advise is to stay away from Extra-Dev unless you're know what you are doing else it will make your device unstable. |
Re: How to flash N900??
Quote:
Cant understand Extra-Dev?? what are they?? |
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
Wait did you flash using the OS or computer? |
Re: How to flash N900??
follow this step using flasher 3.5
In order to flash the eMMC, follow these steps: * Fully charge the battery (IMPORTANT!!) * Unplug the USB cable from the device. * Turn off the device. * Install Flasher for your OS (Linux, Mac OS X or MS Windows) * Grab the Vanilla eMMC image (.bin file) from the Nokia repository * Navigate to the directory where the image file was saved. * Plug in the USB cable into the computer. * Execute the following command (in linux you have to be root!): * Windows flasher-3.5.exe -F RX-51_2009SE_3.2010.02-8.003_PR_COMBINED_003_ARM.bin -f -R * Text similar to the following will be displayed on the computer: flasher v2.5.2 (Oct 21 2009) Image 'mmc', size 241163 kB Version RX-51_2009SE_1.2009.41-1.VANILLA Suitable USB device not found, waiting. * Plug the USB cable into the N900. * The dim Nokia screen will be displayed for a few seconds followed by progression dots. Text similar to the following will be displayed on the computer: USB device found found at bus 001, device address 006. Found device RX-51, hardware revision 2101 NOLO version 1.4.13 Version of 'sw-release': RX-51_2009SE_1.2009.42-11.002_PR_002 Booting device into flash mode. Suitable USB device not found, waiting. USB device found found at bus 001, device address 007. Raw data transfer EP found at EP2. [writing 74 % 179200 / 241163 kB 13180 kB/s] Image(s) flashed successfully in 26.848 s (8982 kB/s)! * The flash will take around 1 minute after which the device will reboot. * The bright Nokia screen will come up on the screen with the USB icon on the top right followed by progression dots with yellow LED blinking for a few seconds. The device will then turn off and go into charging mode with the yellow LED blinking (NOTE: If the device appears to reboot, unplug the cable.) * Unplug cable and wait for device to turn off completely. You may hear a sound (punk) of the device turning off. * Having flashed the eMMC, |
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
I followed the steps for EMMC from the same link from where you write all these(WIKI). It says invalid FIASCO Header??? |
Re: How to flash N900??
Help me plz :-(
|
Re: How to flash N900??
Quote:
i have the same problem when I flash with pr1.1 firmware. i always get the same %m. Most probably the problem is your computer OS (win XP) can't read the long file name. My windows vista 32 bit is doing the same thing. When i check the firmware's filename in the directory where I stored it, the wasn't there even on the cmd. Shorten (rename) the filename. Rename the filename RX-51_2009SE_3.2010.02-8.003_PR_COMBINED_003_ARM.bin to OS3.bin if you can't find the filename download it again and before saving it change the name to OS3.bin OR pretend to download the file to the same dir. where you stored the previous file before you start the download it will show you the files in the directory and you should see the previous downloaded file. You can just right click and rename the file to OS3.bin (or whatever short name you want to). On cmd type: D:\Program Files\maemo\flasher-3.5>Flasher-3.5.exe -F OS3.bin -f -R You should be able to flash now. next time you update, shorten the name. It's easier rather than typing the long name. You can rename the next update to OS4.bin or whatever you like as long as you shorten the name. |
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Just a reminder for those who are having problems using the flasher program.
When entering into flash mode, press the U key on the phone keyboard, not the PC keyboard. I know this sounds obvious, but it took me forever to figure this out lol. |
Re: How to flash N900??
Hi i have messed up my phone by installing untested software (i knew the risks and i accept the consequences) anyway i flashed my N900 with the flasher 3.5 and it now starts up and works fine and has cleared all the apps.
However i now have no network it does not connect to O2-UK any more and has what looks like a sim card with a line through it in the notification area. Can anyone help me? |
Re: How to flash N900??
Have you tried cleaning the sim card? Did you change the region when you flashed it?
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
Quote:
|
Re: How to flash N900??
I'm in way deep here... :p
I have flashed my N900 3 times now. First time i did it from the nokia software updater. Then i got into a boot loop and had to flash again. First time from Win7 with flasher 3.5. (Boot loop again.) Then i tryed from Vista with same flasher. I've seen someone had problems flashing from Win7, so therfor i tryed from Vista. (Its 32bit) I used "RX-51_2009SE_3.2010.02-8_PR_COMBINED_MR0_ARM.BIN" Now what do i do? I see the VANILLA file, but i have to flash the FIASCO image first.. What is FIASCO image, where do i find it and how do i flash it? My N900 is completly useless now, since it only loopin. ;( Help would be appreciated. Sorry for my crappy english. :p |
Re: How to flash N900??
Quote:
That was the problem I was facing. Its simple. Get the image from http://tablets-dev.nokia.com/nokia_N900.php Enter your IMEI. And it will direct you to a page from where you can download the latest image File P.R 1.1 Now rename it to anyname you want and paste this file in the flasher folder that should be present in the program files. Dnt make the mistake that I was doing. I right clicked the icon in start menu and selected "Open File Location" which was actually leading me to the Start menu shortcut folder. Dnt do like this. Copy and Paste it in the flasher folder present in Program Files. Hope u will get ur problem resolved |
All times are GMT. The time now is 16:03. |
vBulletin® Version 3.8.8