maemo.org - Talk
Page 2 of 12 1 2 34 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   [ANOUNCE] CPU Power Control - PyGTK (https://talk.maemo.org/showthread.php?t=78589)

knobby 2011-10-07 12:52
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
@ammyt...
lots of reboots.. :(

is there something to do with vdd1 and vdd2 or the voltages are not sufficient for my n900...? thanks

disappear 2011-10-07 12:55
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
Just a one word BEAUTY

ammyt 2011-10-07 13:19
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
Thanks for all those who tried the program out.
@knobby
When exactly do you get the reboots? Using which profile?
Does your phone reboot when locking it?

knobby 2011-10-07 13:25
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
Quote:
Originally Posted by ammyt (Post 1104696)
Thanks for all those who tried the program out.
@knobby
When exactly do you get the reboots? Using which profile?
Does your phone reboot when locking it?
it is rebooting at reg profile...each time i load settings, the phone reboots...
i tried raising voltages but of no use...but when vdd1 and vdd2 are 0...no reboots at reg profile...
or when cpu freq is 750 MHz then no reboot occur even when vdd1 and vdd2 are = 1

any idea...?

mr_pingu 2011-10-07 13:27
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
Nice application although I tought when I read the threadtitle it would allow us to change voltages from GUI also but too bad it wasn't. It was just for switching profiles and I think that can be done from x-term in a fast way too :P

I'm sure some will like this for sure and find it useful, so you get your thanks =D
Thanks for the effort

Boemien 2011-10-07 13:58
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
loool! why don't you use simple terms instead of Blood Kain and following?? Just a suggestion, no offense!!

knobby 2011-10-07 14:08
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
@ammyt...
sorry but i had to remove it ... so many reboots...

even when phone is locked...starving profile also don't work for me...

sorry buddy.. my n900 seems not to like it.. :p just kiddin...

ammyt 2011-10-07 14:13
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
Quote:
Originally Posted by mr_pingu (Post 1104699)
Nice application although I tought when I read the threadtitle it would allow us to change voltages from GUI also but too bad it wasn't. It was just for switching profiles and I think that can be done from x-term in a fast way too :P

I'm sure some will like this for sure and find it useful, so you get your thanks =D
Thanks for the effort
Well that's not all.
Have you seen the other thread about dynamic CPU Scaling?
This installs the same old patch, i.e. letting the phone scale between 0 --> 500 only and bump it to whatever profile you set when the phone is unlocked. It also pauses battery consuming processes when idle and resumes them when the phone is unlocked, and sers the vfs_cache_pressure to 10 when idle and back to 100 when on usage.

ammyt 2011-10-07 14:15
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
Quote:
Originally Posted by Boemien (Post 1104724)
loool! why don't you use simple terms instead of Blood Kain and following?? Just a suggestion, no offense!!
For triisha02 reasons, don't want to discuss that O:)

fahadj2003 2011-10-07 14:18
Re: [ANNOUNCE] CPUTweak w/ Configurator Program & Effective Battery Saving
 
can i use my own profile with my own voltage settings?
i dun wanna install it yet coz it took me a while to config the voltage settings etc..


All times are GMT. The time now is 15:55.
Page 2 of 12 1 2 34 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8